Компоненты  »  Интегральные схемы (ИС)  »  ИС управления питанием  »  Регуляторы напряжения - линейные

Texas Instruments
LP2988AIMM-3.0

LDO Regulator Pos 3V 0.2A 8-Pin MSOP T/R

Цена от 58,34 ₽ до 421,61 ₽

Наличие Texas Instruments LP2988AIMM-3.0 на складах.

Склад
Наличие и цена
Америка 3
В наличии до 480 шт.
MOQ от 100 шт.
Цена от 58,34 ₽ до 421,61 ₽
США
На складе 144 шт.
Обновлено 10:00 06.03.2021
63,42 ₽ от 1 шт.
62,15 ₽ от 25 шт.
60,88 ₽ от 100 шт.
59,61 ₽ от 500 шт.
58,34 ₽ от 1000 шт.
США
На складе 480 шт.
Обновлено 14:13 05.03.2021
421,61 ₽ от 1 шт.
351,34 ₽ от 4 шт.
309,18 ₽ от 9 шт.
281,07 ₽ от 29 шт.
259,99 ₽ от 104 шт.
231,88 ₽ от 448 шт.
США
На складе 462 шт.
Обновлено 23:01 04.03.2021
Цена по запросу.

Технические характеристики Texas Instruments LP2988AIMM-3.0, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP, SOIC
Падение напряжения:
180 mV
Input Voltage (DC):
16.0 V (max)
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Number of Regulated Outputs:
1
Рабочая Температура:
125 °C (max)
Выходной ток:
200 mA
Выходное напряжение:
3.00 V
Упаковка:
Reel
Количество выводов:
8
Ток покоя:
100 µA
RoHS:
Non-Compliant
  • LDO Regulator Pos 3V 0.2A 8-Pin MSOP T/R
  • Micropower, 200 mA Ultra Low-Dropout Low Noise Voltage Regulator with Prog. Power-On Reset Delay 8-VSSOP -40 to 125
  • FIXED POSITIVE LDO REGULATOR, 3V
  • The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor. The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise. Using an optimized VIP(TM) (Vertically Integrated PNP) process, these regulators deliver superior performance: Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical). Ground Pin Current: 1 mA @ 200 mA load, and 200 uA @ 10 mA load (typical). Sleep Mode: The LP2987/8 draws less than 2 uA quiescent current when shutdown pin is held low. Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin. Precision Output: Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with guaranteed accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.

Документы по Texas Instruments LP2988AIMM-3.0, инструкции, описания, datasheet.

Товары похожие на Texas Instruments LP2988AIMM-3.0, сравнение характеристик.