Компоненты » Датчики » Датчики температуры и влажности

Analog Devices
TMP01FSZ-REEL

Temp Sensor Analog 8-Pin SOIC N T/R

Цена от 603,51 ₽ до 1 087,74 ₽

Datasheet

Наличие Analog Devices TMP01FSZ-REEL на складах.

Дистрибьютор

Наличие и цена

Digi-Key

На складе 1460 шт.

MOQ 1 шт.

Обновлено 14:08 04.03.2021

Упаковка Cut Tape

1 087,74 ₽ от 1 шт.

982,43 ₽ от 10 шт.

936,71 ₽ от 25 шт.

776,80 ₽ от 100 шт.

708,26 ₽ от 250 шт.

662,56 ₽ от 500 шт.

603,51 ₽ от 1000 шт.

Verical

На складе 7500 шт.

MOQ 2500 шт.

Обновлено 17:42 04.03.2021

1 056,47 ₽ от 2500 шт.

Lucentia Tech

На складе 50 шт.

Обновлено 01:17 01.03.2021

Цена по запросу.

Kenton Components

На складе 380 шт.

Обновлено 01:05 01.03.2021

Цена по запросу.

J2 Sourcing

На складе 40 шт.

Обновлено 07:54 05.03.2021

Цена по запросу.

Antdic Electronics

На складе 11280 шт.

Обновлено 03:43 05.03.2021

Цена по запросу.

Технические характеристики Analog Devices TMP01FSZ-REEL, атрибуты и параметры.

Тип корпуса / Кейс:

SOIC

Lead-Free Status:

Contains Lead

Статус жизненного цикла:

Active

Mounting Style:

Surface Mount

Рабочая Температура:

125 °C (max)

Упаковка:

Tape

Количество выводов:

RoHS:

Compliant

Supply Current:

500 µA

Supply Voltage (DC):

12.0 V

Temp Sensor Analog 8-Pin SOIC N T/R
THERMOSTAT PROG ACT HIGH 8SOIC
The TMP01 is a temperature sensor that generates a voltage output proportional to absolute temperature and a control signal from one of two outputs when the device is either above or below a specific temperature range. Both the high/low temperature trip points and hysteresis (overshoot) band are determined by user-selected external resistors. For high volume production, these resistors are available on board. The TMP01 consists of a band gap voltage reference combined with a pair of matched comparators. The reference provides both a constant 2.5 V output and a voltage proportional to absolute temperature (VPTAT) which has a precise temperature coefficient of 5 mV/K and is 1.49 V (nominal) at 25°C. The comparators compare VPTAT with the externally set tempera-ture trip points and generate an open-collector output signal when one of their respective thresholds has been exceeded. Hysteresis is also programmed by the external resistor chain and is determined by the total current drawn out of the 2.5 V reference. This current is mirrored and used to generate a hysteresis offset voltage of the appropriate polarity after a comparator has been tripped. The comparators are connected in parallel, which guarantees that there is no hysteresis overlap and eliminates erratic transitions between adjacent trip zones. The TMP01 utilizes proprietary thin-film resistors in conjunc-tion with production laser trimming to maintain a temperature accuracy of ±1°C (typical) over the rated temperature range, with excellent linearity. The open-collector outputs are capable of sinking 20 mA, enabling the TMP01 to drive control relays directly. Operating from a 5 V supply, quiescent current is only 500 μA (max). The TMP01 is available in 8-pin mini PDIP, SOIC, and TO-99 packages. Applications Over/under temperature sensor and alarm Board-level temperature sensing Temperature controllers Electronic thermostats Thermal protection HVAC systems Industrial process control Remote sensors