Analog Devices
ADG788BCPZ
Analog Switch Quad SPDT 20-Pin LFCSP EP Tray
Цена от 158,18 ₽ до 595,66 ₽
Наличие Analog Devices ADG788BCPZ на складах.
Дистрибьютор
Наличие и цена
На складе 2 шт.
Обновлено 10:00 06.03.2021
На складе 77 шт.
MOQ 1 шт.
Обновлено 19:48 05.03.2021
Упаковка Tray На складе 9 шт.
MOQ 1 шт.
Обновлено 14:47 05.03.2021
Упаковка Tray На складе 8 шт.
Обновлено 14:13 05.03.2021
На складе 6 шт.
Обновлено 23:01 04.03.2021
Цена по запросу.
На складе 827 шт.
MOQ 1 шт.
Обновлено 23:28 05.03.2021
На складе 73 шт.
MOQ 1 шт.
Обновлено 23:28 05.03.2021
На складе 10 шт.
MOQ 1 шт.
Обновлено 22:35 03.03.2021
На складе 870 шт.
MOQ 11 шт.
Обновлено 13:14 03.03.2021
Технические характеристики Analog Devices ADG788BCPZ, атрибуты и параметры.
Пропускная способность:
160 MHz
Тип корпуса / Кейс:
LFCSP
Contacts Type:
SPDT
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Negative Supply Voltage:
0.00 V (min)
Количество контуров:
4
Рабочая Температура:
85.0 °C (max)
Упаковка:
Tray
Количество выводов:
20
Positive Supply Voltage:
2.25 V (min)
Рассеяние мощности:
5.00 µW
Drain to Source Resistance (on) (Rds):
2.50 mΩ
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
- Analog Switch Quad SPDT 20-Pin LFCSP EP Tray
- 2.5ohm, 1.8V to 5.5V, +2.5V, -2.5V Triple/Quad SPDT Switches in Chip Scale Packages | IC SWITCH QUAD SPDT 20LFCSP
- The ADG786 and ADG788 are low voltage, CMOS devices comprising three independently selectable SPDT (single pole, double throw) switches and four independently selectable SPDT switches respectively. Lower power consumption and operating supply range of 1.8 V to 5.5 V and dual ±2.5 V make the ADG786 and ADG788 ideal for battery powered, portable instruments and many other applications. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. An EN input on the ADG786 is used to enable or diable the device. When disabled, all channels are switched OFF. These multiplexers are designed on an enhanced submicron process that provides low power dissipation yet gives high switching speed, very low on resistance, high signal bandwidths and low leakage currents. On resistance is in the region of a few ohms, is closely matched between switches and very flat over the full signal range. These parts can operate equally well in either direction and have an input signal range which extends to the supplies. The ADG786 and ADG788 are available in small 20-lead chip scale packages. Product Highlights Small 20-Lead 4 mm × 4 mm Chip Scale Packages (CSP). Single/Dual Supply Operation. The ADG786 and ADG788 are fully specified and guaranteed with 3 V ± 10% and 5 V ± 10% single supply rails, and ± 2.5 V ± 10% dual supply rails. Low On Resistance (2.5 Ω typical). Low Power Consumption (<0.01 μW). Guaranteed Break-Before-Make Switching Action. Applications Data Acquisition Systems Communication Systems Relay Replacement Audio and Video Switching Battery-Powered Systems
Документы по Analog Devices ADG788BCPZ, инструкции, описания, datasheet.
Товары похожие на Analog Devices ADG788BCPZ, сравнение характеристик.
Пропускная способность 160 MHz.
Тип корпуса / Кейс LFCSP.
Contacts Type SPDT.
Lead-Free Status Contains Lead.
Статус жизненного цикла Active.
Mounting Style Surface Mount.
Negative Supply Voltage 0.00 V (min).
Количество бит 3.
Рабочая Температура -40.0 °C (min).
Упаковка Tray, Bulk.
Количество выводов 20.
Positive Supply Voltage 1.80 V (min).
Рассеяние мощности 5.00 µW.
REACH SVHC Compliance No SVHC.
RoHS Compliant.