Наличие Honeywell 3070A35 на складах.
Дистрибьютор
Наличие и цена
На складе 6 шт.
MOQ 1 шт.
Обновлено 14:10 23.02.2021
Упаковка Box На складе 13 шт.
MOQ 1 шт.
Обновлено 12:16 23.02.2021
Упаковка Bulk На складе 13 шт.
MOQ 1 шт.
Обновлено 10:00 12.02.2021
На складе 12 шт.
MOQ 1 шт.
Обновлено 17:48 23.02.2021
На складе 2 шт.
Обновлено 20:58 23.02.2021
Цена по запросу.
Технические характеристики Honeywell 3070A35, атрибуты и параметры.
Катушка сопротивление:
280 Ω (max)
Индуктивность:
115 mH
Lead-Free Status:
Exempt
Mounting Style:
Chassis
Рабочая Температура:
93.0 °C (max)
RoHS:
Non-Compliant
Вес:
322 g
- Датчики, магнитные датчики положения, скорости и направления - датчики скорости с регулируемым сопротивлением
- Transportation & Industrial Speed Sensor
- Explosion Proof VRS Sensor 3-Pin
- SENSOR VRS SINE WAVE WIRE LEADS
- Hazardous Location VRS sensors are designed for use in locations where explosion-proof or intrinsically safe sensors are required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Honeywell also offers VRS sensors for general purpose, high output, power output, high resolution and high temperature, as well as low-cost molded versions.
