Компоненты  »  Интегральные схемы (ИС)  »  ИС преобразователя данных  »  Цифровые потенциометры

Analog Devices
AD5162BRMZ50

Digital Potentiometer 50kOhm 256POS Volatile Linear 10-Pin MSOP Tube

Цена от 144,50 ₽ до 321,23 ₽

Наличие Analog Devices AD5162BRMZ50 на складах.

Склад
Наличие и цена
Америка 3
В наличии до 1571 шт.
MOQ от 1 шт.
Цена от 144,50 ₽ до 321,23 ₽
США
На складе 1571 шт.
MOQ 1 шт.
Обновлено 19:31 01.03.2021
Упаковка Tube
303,45 ₽ от 1 шт.
256,76 ₽ от 10 шт.
248,98 ₽ от 50 шт.
211,19 ₽ от 100 шт.
153,39 ₽ от 1000 шт.
144,50 ₽ от 10000 шт.
США
На складе 50 шт.
MOQ 50 шт.
Обновлено 17:41 01.03.2021
154,50 ₽ от 50 шт.
США
На складе 31 шт.
MOQ 1 шт.
Обновлено 14:45 01.03.2021
Упаковка Tube
321,23 ₽ от 1 шт.
288,78 ₽ от 10 шт.
273,04 ₽ от 25 шт.
224,51 ₽ от 100 шт.
201,45 ₽ от 250 шт.
194,17 ₽ от 500 шт.
161,40 ₽ от 1000 шт.
160,28 ₽ от 2500 шт.

Технические характеристики Analog Devices AD5162BRMZ50, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Clock Speed:
25.0 MHz (max)
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Количество контуров:
2
Рабочая Температура:
125 °C (max)
Упаковка:
Tube, Bulk
Количество выводов:
10
Ток покоя:
3.50 µA
REACH SVHC Compliance:
No SVHC
Сопротивление:
50.0 kΩ
Resistance Tolerance:
±20%
RoHS:
Compliant
Supply Current:
3.50 µA
Supply Voltage (DC):
5.50 V (max), 2.70 V (min)
Температурный коэффициент:
35.0 ppm/°C
  • Digital Potentiometer 50kOhm 256POS Volatile Linear 10-Pin MSOP Tube
  • DIGITAL POT, 50KOHM, DUAL, MSOP-10
  • End To End Resistance:50kohm
  • Кол-во горшков: Двойной
  • Интерфейс управления: SPI
  • Track Taper:Linear
  • Допуск сопротивления: ± 20%
  • Мин. Напряжение питания: 2,7 В
  • Максимальное напряжение питания: 5,5 В
  • No. of Pins:10Pins RoHS Compliant: Yes
  • The AD5162 provides a compact 3 mm x 4.9 mm packaged solution for dual 256 position adjustment applications. This device performs the same electronic adjustment function as a 3-terminal mechanical potentiometer. Available in four different end-to-end resistance values (2.5 kO, 10 kO, 50 kO, 100 kO), this low temperature coefficient device is ideal for high accuracy and stability-variable resistance adjustments. The wiper settings are controllable through the SPI compatible digital interface. The resistance between the wiper and either end point of the fixed resistor varies linearly with respect to the digital code transferred into the RDAC latch1. Operating from a 2.7 V to 5.5 V power supply and consuming less than 6 µA allows the AD5162 to be used in portable battery-operated applications. For applications that program the AD5162 at the factory, Analog Devices offers device programming software running on Windows® NT/2000/XP operating systems. This software effectively replaces the need for external SPI controllers, which in turn enhances the time to market of systems. An AD5162 evaluation kit and software are available. The kit includes a cable and instruction manual. 1 The terms digital potentiometer, VT, and RDAC are used interchangeably. Applications Systems calibrations Electronics level settings Mechanical trimmers replacement in new designs Permanent factory PCB setting Transducer adjustment of pressure, temperature, position, chemical, and optical sensors RF amplifier biasing Automotive electronics adjustment Gain control and offset adjustment

Документы по Analog Devices AD5162BRMZ50, инструкции, описания, datasheet.

Товары похожие на Analog Devices AD5162BRMZ50, сравнение характеристик.