Компоненты  »  Интегральные схемы (ИС)  »  ИС преобразователя данных  »  Цифровые потенциометры

Analog Devices
AD5170BRMZ100

Digital Potentiometer 256POS 100KOhm Single 10-Pin MSOP Tube

Цена от 179,04 ₽ до 194,61 ₽

Наличие Analog Devices AD5170BRMZ100 на складах.

Дистрибьютор
Наличие и цена
Rochester Electronics
На складе 8980 шт.
Обновлено 10:08 15.02.2021
194,61 ₽ от 1 шт.
190,72 ₽ от 25 шт.
186,83 ₽ от 100 шт.
182,93 ₽ от 500 шт.
179,04 ₽ от 1000 шт.

Технические характеристики Analog Devices AD5170BRMZ100, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Pending Obsolescence
Mounting Style:
Surface Mount
Количество контуров:
1
Рабочая Температура:
125 °C (max)
Упаковка:
Bulk
Количество выводов:
10
Ток покоя:
3.50 µA
REACH SVHC Compliance:
No SVHC
Сопротивление:
100 kΩ
Resistance Tolerance:
±20%
RoHS:
Compliant
Supply Current:
3.50 µA
Температурный коэффициент:
35.0 ppm/°C
  • Digital Potentiometer 256POS 100KOhm Single 10-Pin MSOP Tube
  • DIGITAL POT 8BIT 100K TTP, MSOP10
  • Resistance Range Type:Linear
  • Memory Type:One Time Programmable
  • Количество каналов: 2
  • No. of Positions:256
  • Resistance, End-to-End:100kohm
  • Interface Type:I2C, Serial, 2 Wire
  • Напряжение, Мин. Питания: 2,7 В
  • Voltage, Supply Max:5.5V
  • Тип завершения: SMD
  • Case Style:MSOP
  • Количество контактов: 10
  • Диапазон рабочих температур: от -40 ° C до + 125 ° C
  • Temp, Op. Max:125°C
  • Темп, соч. Мин .: -40 ° C
  • Base Number:5170
  • Logic Function Number:5170
  • Track Resistance:100kohm
  • The AD5170 is a 256-position, two-time programmable, digital potentiometer1 that employs fuse link technology, giving users two opportunities to permanently program the resistance setting. For users who do not need to program the digital potentiometer setting in memory more than once, the OTP feature is a cost-effective alternative to EEMEM. The AD5170 performs the same electronic adjustment function as mechanical potentiometers or variable resistors with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance. The AD5170 is programmed using a 2-wire, I2C®-compatible digital interface. Unlimited adjustments are allowed before permanently setting the resistance value, and there are two opportunities for permanent programming. During OTP activation, a permanent blow fuse command freezes the wiper position (analogous to placing epoxy on a mechanical trimmer). Unlike traditional OTP digital potentiometers, the AD5170 has a unique temporary OTP overwrite feature that allows for new adjustments even after the fuse is blown. However, the OTP setting is restored during subsequent power-up conditions. This feature allows users to treat these digital potentiometers as volatile potentiometers with a programmable preset. For applications that program the AD5170 at the factory, Analog Devices, Inc., offers device programming software that runs on Windows NT®, Windows® 2000, and Windows XP operating systems. This software effectively replaces any external I2C controllers, thus enhancing the time-to-market of the systems of the user. Applications Systems calibration Electronics level setting Mechanical trimmers replacement in new designs Permanent factory PCB settings Transducer adjustment of pressure, temperature, position, chemical, and optical sensors RF amplifier biasing Automotive electronics adjustments Gain control and offset adjustments * The terms digital potentiometer, VR, and RDAC are used interchangeably. Data Sheet, Rev. D, 7/08

Документы по Analog Devices AD5170BRMZ100, инструкции, описания, datasheet.

Товары похожие на Analog Devices AD5170BRMZ100, сравнение характеристик.