Компоненты  »  Интегральные схемы (ИС)  »  ИС преобразователя данных  »  Цифровые потенциометры

Analog Devices
AD5172BRMZ10-RL7

Digital Potentiometer 10kOhm 256POS Volatile 10-Pin MSOP T/R

Цена от 398,26 ₽ до 526,14 ₽

Наличие Analog Devices AD5172BRMZ10-RL7 на складах.

Дистрибьютор
Наличие и цена
Verical
На складе 78 шт.
MOQ 3 шт.
Обновлено 17:49 14.02.2021
465,57 ₽ от 3 шт.
429,13 ₽ от 10 шт.
398,26 ₽ от 25 шт.
Arrow Electronics
На складе 78 шт.
MOQ 1 шт.
Обновлено 16:45 14.02.2021
Упаковка Cut Tape
484,19 ₽ от 1 шт.
446,30 ₽ от 10 шт.
414,19 ₽ от 25 шт.
Arrow.cn
На складе 78 шт.
MOQ 1 шт.
Обновлено 16:16 02.02.2021
526,14 ₽ от 1 шт.
486,81 ₽ от 10 шт.
449,36 ₽ от 25 шт.
Ampacity Systems
На складе 635 шт.
Обновлено 03:33 08.02.2021
Цена по запросу.

Технические характеристики Analog Devices AD5172BRMZ10-RL7, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Clock Speed:
400 kHz (max)
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Количество контуров:
2
Рабочая Температура:
125 °C (max)
Упаковка:
Tape, Tape & Reel (TR)
Количество выводов:
10
Ток покоя:
3.50 µA
Сопротивление:
10.0 kΩ
Resistance Tolerance:
±20%
RoHS:
Compliant
Supply Current:
3.50 µA
Температурный коэффициент:
35.0 ppm/°C
  • Digital Potentiometer 10kOhm 256POS Volatile 10-Pin MSOP T/R
  • IC DGTL POT 10KOHM 256TAP 10MSOP
  • The AD5172/AD5173 are dual-channel, 256-position, one-time programmable (OTP) digital potentiometers1 that employ fuse link technology to achieve memory retention of resistance settings. OTP is a cost-effective alternative to EEMEM for users who do not need to program the digital potentiometer setting in memory more than once. These devices perform the same electronic adjustment function as mechanical potentiometers or variable resistors with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance. The AD5172/AD5173 are programmed using a 2-wire, I2C®-compatible digital interface. Unlimited adjustments are allowed before permanently setting the resistance value. During OTP activation, a permanent blow fuse command freezes the wiper position (analogous to placing epoxy on a mechanical trimmer). Unlike traditional OTP digital potentiometers, the AD5172/AD5173 have a unique temporary OTP overwrite feature that allows for new adjustments even after a fuse is blown. However, the OTP setting is restored during subsequent power-up conditions. This allows users to treat these digital potentiometers as volatile potentiometers with a programmable preset. Applications Systems calibration Electronics level setting Mechanical trimmers replacement in new designs Permanent factory PCB setting Transducer adjustment of pressure, temperature, position, chemical, and optical sensors RF amplifier biasing Automotive electronics adjustment Gain control and offset adjustment 1 The terms digital potentiometer, VR, and RDAC are used interchangeably.

Документы по Analog Devices AD5172BRMZ10-RL7, инструкции, описания, datasheet.

Товары похожие на Analog Devices AD5172BRMZ10-RL7, сравнение характеристик.