Компоненты  »  Интегральные схемы (ИС)  »  ИС преобразователя данных  »  Цифровые потенциометры

Analog Devices
AD5172BRMZ100-RL7

Digital Potentiometer 100kOhm 256POS Volatile 10-Pin MSOP T/R

Цена от 231,02 ₽ до 497,25 ₽

Наличие Analog Devices AD5172BRMZ100-RL7 на складах.

Дистрибьютор
Наличие и цена
Mouser
На складе 981 шт.
MOQ 1 шт.
Обновлено 19:44 12.02.2021
Упаковка Tape & Reel
468,65 ₽ от 1 шт.
421,34 ₽ от 10 шт.
398,24 ₽ от 50 шт.
326,73 ₽ от 100 шт.
237,62 ₽ от 1000 шт.
231,02 ₽ от 10000 шт.
Digi-Key
На складе 962 шт.
MOQ 1 шт.
Обновлено 14:08 14.02.2021
Упаковка Cut Tape
469,75 ₽ от 1 шт.
421,56 ₽ от 10 шт.
398,50 ₽ от 25 шт.
327,67 ₽ от 100 шт.
294,02 ₽ от 250 шт.
283,39 ₽ от 500 шт.
Digi-Key
На складе 962 шт.
MOQ 1 шт.
Обновлено 14:08 14.02.2021
Упаковка Custom Reel
497,25 ₽ от 1 шт.
446,86 ₽ от 10 шт.
422,44 ₽ от 25 шт.
347,33 ₽ от 100 шт.
311,66 ₽ от 250 шт.
300,39 ₽ от 500 шт.

Технические характеристики Analog Devices AD5172BRMZ100-RL7, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Clock Speed:
400 kHz (max)
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Количество контуров:
2
Рабочая Температура:
125 °C (max)
Упаковка:
Cut Tape (CT), Tape & Reel (TR)
Количество выводов:
10
Ток покоя:
3.50 µA
Сопротивление:
100 kΩ
Resistance Tolerance:
±20%
RoHS:
Compliant
Supply Current:
3.50 µA
Температурный коэффициент:
35.0 ppm/°C
  • Digital Potentiometer 100kOhm 256POS Volatile 10-Pin MSOP T/R
  • IC DGT POT 100KOHM 256TAP 10MSOP
  • The AD5172/AD5173 are dual-channel, 256-position, one-time programmable (OTP) digital potentiometers1 that employ fuse link technology to achieve memory retention of resistance settings. OTP is a cost-effective alternative to EEMEM for users who do not need to program the digital potentiometer setting in memory more than once. These devices perform the same electronic adjustment function as mechanical potentiometers or variable resistors with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance. The AD5172/AD5173 are programmed using a 2-wire, I2C®-compatible digital interface. Unlimited adjustments are allowed before permanently setting the resistance value. During OTP activation, a permanent blow fuse command freezes the wiper position (analogous to placing epoxy on a mechanical trimmer). Unlike traditional OTP digital potentiometers, the AD5172/AD5173 have a unique temporary OTP overwrite feature that allows for new adjustments even after a fuse is blown. However, the OTP setting is restored during subsequent power-up conditions. This allows users to treat these digital potentiometers as volatile potentiometers with a programmable preset. Applications Systems calibration Electronics level setting Mechanical trimmers replacement in new designs Permanent factory PCB setting Transducer adjustment of pressure, temperature, position, chemical, and optical sensors RF amplifier biasing Automotive electronics adjustment Gain control and offset adjustment 1 The terms digital potentiometer, VR, and RDAC are used interchangeably.

Документы по Analog Devices AD5172BRMZ100-RL7, инструкции, описания, datasheet.

Товары похожие на Analog Devices AD5172BRMZ100-RL7, сравнение характеристик.