Analog Devices
AD586LQ
Three Terminal Voltage Reference, 1 Output, 5V, Trim/Adjustable, BIPolar, CDIP8
Цена от 1 636,54 ₽ до 2 399,95 ₽
Наличие Analog Devices AD586LQ на складах.
Склад
Наличие и цена
В наличии до 336 шт.
MOQ от 1 шт.
Цена от 1 636,54 ₽ до 2 182,06 ₽
На складе 7 шт.
Обновлено 11:17 08.02.2021
На складе 93 шт.
Обновлено 10:08 08.02.2021
На складе 336 шт.
MOQ 48 шт.
Обновлено 17:47 07.02.2021
На складе 42 шт.
MOQ 1 шт.
Обновлено 02:19 06.02.2021
На складе 2 шт.
MOQ 1 шт.
Обновлено 18:11 05.02.2021
Цена по запросу.
На складе 12 шт.
Обновлено 20:05 05.02.2021
Цена по запросу.
В наличии до 70 шт.
MOQ от 100 шт.
На складе 70 шт.
Обновлено 03:35 08.02.2021
Цена по запросу.
На складе 4 шт.
Обновлено 08:28 08.02.2021
Цена по запросу.
В наличии до 517 шт.
MOQ от 100 шт.
Цена 2 399,95 ₽
На складе 517 шт.
Обновлено 16:13 06.02.2021
Технические характеристики Analog Devices AD586LQ, атрибуты и параметры.
Тип корпуса / Кейс:
CDIP
Текущий рейтинг:
3.00 mA
Input Voltage (DC):
10.8 V to 36.0 V
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Through Hole
Количество каналов:
1
Рабочая Температура:
70.0 °C (max)
Выходной ток:
10.0 mA (max), 10.0 mA
Выходное напряжение:
5.00 V
Упаковка:
Bulk
Количество выводов:
8
Ток покоя:
3.00 mA (max)
RoHS:
Non-Compliant
Supply Current:
3.00 mA
Температурный коэффициент:
5.00 ppm/°C
- Three Terminal Voltage Reference, 1 Output, 5V, Trim/Adjustable, BIPolar, CDIP8
- Voltage Reference Precision 5 Volt 10 mA 8-Pin CDIP
- V-Ref Precision 5V 10mA 8-Pin CDIP Tube
- The AD586 represents a major advance in the state-of-the-art in monolithic voltage references. Using a proprietary ion-implanted buried Zener diode and laser wafer trimming of high stability thin-film resistors, the AD586 provides outstanding performance at low cost. The AD586 offers much higher performance than most other 5 V references. Because the AD586 uses an industry standard pinout, many systems can be upgraded instantly with the AD586. The buried Zener approach to reference design provides lower noise and drift than bandgap voltage references. The AD586 offers a noise reduction pin which can be used to further reduce the noise level generated by the buried Zener. The AD586 is recommended for use as a reference for 8-, 10-, 12-, 14- or 16-bit D/A converters which require an external precision reference. The device is also ideal for successive approximation or integrating A/D converters with up to 14 bits of accuracy and, in general, can offer better performance than the standard on-chip references. The AD586J, K, L and M are specified for operation from 0°C to +70°C, the AD586A and B are specified for -40°C to +85°C operation, and the AD586S and T are specified for -55°C to +125°C operation. The AD586J, K, L and M are available in an 8-pin plastic DIP. The AD586J, K, L, A and B are available in an 8-pin plastic surface mount small outline (SO) package. The AD586J, K, L, S and T are available in an 8-pin cerdip package.