Компоненты » Датчики » Датчики температуры и влажности

Analog Devices
AD7416AR-REEL

Digital Temperature Sensor 8-Pin SOIC N T/R

Цена от 118,29 ₽ до 281,65 ₽

Datasheet

Наличие Analog Devices AD7416AR-REEL на складах.

Дистрибьютор

Наличие и цена

Quest

На складе 1881 шт.

Обновлено 14:13 05.03.2021

281,65 ₽ от 1 шт.

259,12 ₽ от 3 шт.

225,32 ₽ от 12 шт.

168,99 ₽ от 40 шт.

152,09 ₽ от 104 шт.

140,83 ₽ от 230 шт.

129,56 ₽ от 496 шт.

118,29 ₽ от 897 шт.

Rochester Electronics

На складе 77500 шт.

Обновлено 10:00 05.03.2021

180,49 ₽ от 1 шт.

176,88 ₽ от 25 шт.

173,27 ₽ от 100 шт.

169,66 ₽ от 500 шт.

166,05 ₽ от 1000 шт.

Lucentia Tech

На складе 506 шт.

Обновлено 01:17 01.03.2021

Цена по запросу.

Classic Components

На складе 59 шт.

Обновлено 16:26 02.03.2021

Цена по запросу.

Технические характеристики Analog Devices AD7416AR-REEL, атрибуты и параметры.

Тип корпуса / Кейс:

SOIC

Lead-Free Status:

Contains Lead

Статус жизненного цикла:

Pending Obsolescence

Mounting Style:

Surface Mount

Упаковка:

Tape, Tape & Reel (TR)

Количество выводов:

Разрешение (бит):

10.0

RoHS:

Non-Compliant

Supply Current:

1.00 mA

Digital Temperature Sensor 8-Pin SOIC N T/R
IC SENSOR TEMP 10BIT 8-SOIC T/R
IC,Digital Thermometer,CMOS,SOP,8PIN
The AD7417 and AD7418 are 10-bit, 4-channel and single-channel ADCs with an on-chip temperature sensor that can operate from a single 2.7 V to 5.5 V power supply. The devices contain a 15 µs successive approximation converter, a 5-channel multiplexer, a temperature sensor, a clock oscillator, a track-and-hold, and a reference (2.5 V). The AD7416 is a temperature-monitoring only device in an 8-lead package. The temperature sensor on the parts can be accessed via multip-lexer Channel 0. When Channel 0 is selected and a conversion is initiated, the resulting ADC code at the end of the conversion gives a measurement of the ambient temperature (±1°C @ 25°C). On-chip registers can be programmed with high and low tempera-ture limits, and an open-drain overtemperature indicator (OTI) output is provided, which becomes active when a programmed limit is exceeded. A configuration register allows programming of the sense of the OTI output (active high or active low) and its operating mode (comparator or interrupt). A programmable fault queue counter allows the number of out-of-limit measurements that must occur before triggering the OTI output to be set to prevent spurious triggering of the OTI output in noisy environments. An I2C® compatible serial interface allows the AD7416/AD7417/ AD7418 registers to be written to and read back. The three LSBs of the AD7416/AD7417 serial bus address can be selected, which allows up to eight AD7416/AD7417 devices to be connected to a single bus. The AD7417 is available in a narrow body, 0.15 inch, 16-lead, small outline package (SOIC) and in a 16-lead, thin shrink, small outline package (TSSOP). The AD7416 and AD7418 are available in 8-lead SOIC and MSOP packages. Product Highlights The AD7416/AD7417/AD7418 have an on-chip temperature sensor that allows an accurate measurement of the ambient temperature (±1°C @ 25°C, ±2°C overtemperature) to be made. The measurable temperature range is -40°C to +125°C. An overtemperature indicator is implemented by carrying out a digital comparison of the ADC code for Channel 0 (temperature sensor) with the contents of the on-chip TOTI setpoint register. The AD7417 offers a space-saving, 10-bit analog-to-digital solution with four external voltage input channels, an on-chip temperature sensor, an on-chip reference, and a clock oscillator. The automatic power-down feature enables the AD7416/ AD7417/AD7418 to achieve superior power performance. At slower throughput rates, the part can be programmed to operate in a low power shutdown mode, allowing further savings in power consumption. Applications Data acquisition with ambient temperature monitoring Industrial process control Automotive Battery-charging applications Personal computers