Компоненты » Интегральные схемы (ИС) » Линейные ИС » Усилители - операционные усилители, буферные, измерительные приборы
Analog Devices
AD820ARZ
Operational Amplifier, Single, 1.9 Mhz, 1, 3 V/ S, 5V To 36V, Soic, 8 Rohs Compliant: Yes
Цена от 286,32 ₽ до 3 476,34 ₽
Наличие Analog Devices AD820ARZ на складах.
Дистрибьютор
Наличие и цена
Технические характеристики Analog Devices AD820ARZ, атрибуты и параметры.
Пропускная способность:
1.80 MHz
Тип корпуса / Кейс:
SOIC, SOP
Коэффициент подавления синфазного сигнала:
80.0 dB
Продукт увеличения пропускной способности:
1.90 MHz
Входная емкость:
2.80 pF
Input Impedance:
10.0 TΩ
Lead-Free Status:
Lead Free
Статус жизненного цикла:
Active
Mil-Spec:
No
Mounting Style:
Surface Mount
Количество каналов:
1
Количество контуров:
1
Рабочая Температура:
-40.0 °C to 85.0 °C
Упаковка:
Tube
Количество выводов:
8
Рассеяние мощности:
1.00 W
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
Скорость нарастания:
3.00 V/μs
Supply Current:
800 µA (max)
Supply Voltage (DC):
5.00 V
- Operational Amplifier, Single, 1.9 Mhz, 1, 3 V/ S, 5V To 36V, Soic, 8 Rohs Compliant: Yes
- Op Amp Single Precision Amplifier R-R O/P ¡À18V/36V 8-Pin SOIC N Tube
- OP Amp Single General Purpose Rail to Rail O/P ±18 Volt 36 Volt 8-Pin SOIC N
- SINGLE-SUPPLY, RAIL-TO-RAIL, LOW POWER FET-INPUT OP AMP, 8 PIN SOIC
- Operational Amplifier, 1 Func, 1500uV Offset-Max, BIPolar, PDSO8
- The AD820 is a precision, low power FET input op amp that can operate from a single supply of 5 V to 36 V, or dual supplies of ±2.5 V to ±18 V. It has true single-supply capability, with an input voltage range extending below the negative rail, allowing the AD820 to accommodate input signals below ground in the single-supply mode. Output voltage swing extends to within 10 mV of each rail, providing the maximum output dynamic range. Offset voltage of 800 µV maximum, offset voltage drift of 2 µV/°C, typical input bias currents below 25 pA, and low input voltage noise provide dc precision with source impedances up to 1 GO. 1.8 MHz unity gain bandwidth, -93 dB THD at 10 kHz, and 3 V/µs slew rate are provided for a low supply current of 800 µA. The AD820 drives up to 350 pF of direct capacitive load and provides a minimum output current of 15 mA. This allows the amplifier to handle a wide range of load conditions. This combination of ac and dc performance, plus the outstanding load drive capability, results in an exceptionally versatile amplifier for the single-supply user. The AD820 is available in two performance grades. The A and B grades are rated over the industrial temperature range of -40°C to +85°C. The AD820 is offered in three 8-lead package options: plastic DIP (PDIP), surface mount (SOIC) and (MSOP). Applications Battery-powered precision instrumentation Photodiode preamps Active filters 12-bit to 14-bit data acquisition systems Medical instrumentation Low power references and regulators Data Sheet, Rev. F, 11/08
