Analog Devices
ADG509FBRNZ
Analog Multiplexer Single 4: 1 16-Pin SOIC N Tube
Цена от 367,71 ₽ до 1 505,89 ₽
Наличие Analog Devices ADG509FBRNZ на складах.
Склад
Наличие и цена
В наличии до 1741 шт.
MOQ от 1 шт.
Цена от 367,71 ₽ до 1 262,01 ₽
На складе 61 шт.
Обновлено 18:55 10.02.2021
На складе 240 шт.
MOQ 144 шт.
Обновлено 17:52 10.02.2021
На складе 21 шт.
Обновлено 10:10 11.02.2021
На складе 1632 шт.
Обновлено 11:48 04.02.2021
На складе 1741 шт.
MOQ 1 шт.
Обновлено 14:29 10.02.2021
Упаковка Tube На складе 240 шт.
MOQ 144 шт.
Обновлено 16:32 10.02.2021
На складе 615 шт.
MOQ 1 шт.
Обновлено 19:43 10.02.2021
Упаковка Tube На складе 100 шт.
Обновлено 10:26 11.02.2021
На складе 28 шт.
Обновлено 15:54 09.02.2021
Цена по запросу.
В наличии до 13078 шт.
MOQ от 8 шт.
Цена от 554,12 ₽ до 820,87 ₽
На складе 1076 шт.
MOQ 8 шт.
Обновлено 09:24 07.02.2021
На складе 709 шт.
Обновлено 03:33 08.02.2021
Цена по запросу.
На складе 13078 шт.
Обновлено 13:00 10.02.2021
Цена по запросу.
На складе 3100 шт.
Обновлено 15:57 26.01.2021
Цена по запросу.
В наличии до 81 шт.
MOQ от 1 шт.
Цена от 1 036,11 ₽ до 1 505,89 ₽
На складе 81 шт.
MOQ 1 шт.
Обновлено 11:00 11.02.2021
На складе 21 шт.
MOQ 1 шт.
Обновлено 01:31 09.02.2021
Технические характеристики Analog Devices ADG509FBRNZ, атрибуты и параметры.
Тип корпуса / Кейс:
SOIC
Contacts Type:
4PST
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Negative Supply Voltage:
-16.5 V (max)
Количество каналов:
4
Количество контуров:
2
Рабочая Температура:
-40.0 °C to 85.0 °C
Упаковка:
Bulk
Количество выводов:
16
Positive Supply Voltage:
16.5 V (max)
Рассеяние мощности:
3.00 mW
Drain to Source Resistance (on) (Rds):
300 Ω
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
Supply Current:
600 µA
Supply Voltage (DC):
15.0 V (max)
- Analog Multiplexer Single 4:1 16-Pin SOIC N Tube
- Analogue Multiplexer / Demultiplexer, 4:1, 2, 300 Ohm, 10.8V To 16.5V, Soic, 16 Rohs Compliant: Yes
- IC MULTIPLEXER DUAL 4X1 16SOIC
- ANLG MUX DUAL 4:1 22V 16SOIC N
- Analog Devices ADG509FBRNZ IC, ADG509FBRNZ
- The ADG508F and ADG509F are CMOS analog multiplexers, with the ADG508F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexer provides fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from -40 V to +55 V. During fault conditions with power suppplies off, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current will flow. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources that drive the multiplexer. The ADG508F switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. The ADG509F switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched OFF. Product Highlights Fault protection. The ADG508F/ADG509F can withstand continuous voltage inputs from -40 V to +55 V. When a fault occurs due to the power supplies being turned off, all the channels are turned off and only a leakage current of a few nanoamperes flows. On channel saturates while fault exists. Low RON. Fast switching times. Break-before-make switching. Switches are guaranteed break-before-make so that input signals are protected against momentary shorting. Trench isolation eliminates latch-up. A dielectric trench separates the p and n-channel MOSFETs thereby preventing latch-up. Applications Existing multiplexer applications (both fault-protected and nonfault-protected) New designs requiring multiplexer functions
