Analog Devices
ADG5413BCPZ-REEL7
Ic, Analog Switch, Quad, Spst, Lfcsp-16, Full Reel
Цена от 342,45 ₽ до 686,70 ₽
Наличие Analog Devices ADG5413BCPZ-REEL7 на складах.
Дистрибьютор
Наличие и цена
На складе 6000 шт.
MOQ 1500 шт.
Обновлено 14:18 25.02.2021
Упаковка Tape & Reel На складе 1500 шт.
MOQ 1 шт.
Обновлено 19:35 24.02.2021
Упаковка Tape & Reel На складе 6525 шт.
MOQ 1 шт.
Обновлено 14:18 25.02.2021
Упаковка Cut Tape На складе 2630 шт.
Обновлено 08:25 26.02.2021
Цена по запросу.
Технические характеристики Analog Devices ADG5413BCPZ-REEL7, атрибуты и параметры.
Пропускная способность:
160 MHz
Тип корпуса / Кейс:
SOP
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Negative Supply Voltage:
0.00 V (min)
Рабочая Температура:
-40.0 °C (min)
Упаковка:
Cut Tape (CT)
Количество выводов:
16
Positive Supply Voltage:
36.0 V (max)
Рассеяние мощности:
1.00 mW
RoHS:
Compliant
- Ic, Analog Switch, Quad, Spst, Lfcsp-16, Full Reel
- ANALOGUE SWITCH, QUAD, SPST, LFCSP-16
- А
- ANALOGUE SWITCH, QUAD, SPST, LFCSP-16
- Тип аналогового переключателя: SPST
- Количество каналов: 4
- Максимальное сопротивление в состоянии: 10 Ом
- Analog Switch Case Style:LFCSP
- Количество контактов: 16
- Минимальная рабочая температура: -40 ° C
- Максимальная рабочая температура: 125 ° C
- The ADG5412/ADG5413 contain four independent single-pole/single-throw (SPST) switches. The ADG5412 switches turn on with Logic 1. The ADG5413 has two switches with digital control logic similar to that of the ADG5412
- however, the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on, and each switch has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. The ADG5412 and ADG5413 do not have a VL pin. The digital inputs are compatible with 3 V logic inputs over the full operating supply range. The on-resistance profile is very flat over the full analog input range, which ensures good linearity and low distortion when switching audio signals. High switching speed also makes the devices suitable for video signal switching. The ADG5413 exhibits break-before-make switching action for use in multiplexer applications. Product Highlights Trench isolation guards against latch-up. A dielectric trench separates the P and N channel transistors thereby preventing latch-up even under severe overvoltage conditions. Low RON. Dual-supply operation. For applications where the analog signal is bipolar, the ADG5412/ADG5413 can be operated from dual supplies up to ±22 V. Single-supply operation. For applications where the analog signal is unipolar, the ADG5412/ADG5413 can be operated from a single rail power supply up to 40 V. 3 V logic compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V. No VL logic power supply required. Applications Relay replacement Automatic test equipment Data acquisition Instrumentation Avionics Audio and video switching Communication systems
