Компоненты » Интегральные схемы (ИС) » РЧ полупроводники и устройства » РЧ усилители

Analog Devices
ADL5324ARKZ-R7

RF Amp Single Driver Amp 4GHz 5.25V 4-Pin(3+Tab) SOT-89 T/R

Цена от 558,55 ₽ до 5 280,69 ₽

Datasheet

Наличие Analog Devices ADL5324ARKZ-R7 на складах.

Дистрибьютор

Наличие и цена

Farnell

На складе 726 шт.

MOQ 1 шт.

Обновлено 03:31 01.03.2021

5 280,69 ₽ от 1 шт.

4 423,80 ₽ от 10 шт.

4 026,70 ₽ от 25 шт.

3 824,67 ₽ от 50 шт.

3 622,64 ₽ от 100 шт.

3 323,07 ₽ от 250 шт.

3 023,51 ₽ от 500 шт.

Digi-Key

На складе 797 шт.

MOQ 1 шт.

Обновлено 14:16 28.02.2021

Упаковка Cut Tape

893,67 ₽ от 1 шт.

819,20 ₽ от 10 шт.

744,73 ₽ от 25 шт.

670,26 ₽ от 100 шт.

614,40 ₽ от 250 шт.

558,55 ₽ от 500 шт.

Newark

На складе 571 шт.

MOQ 1 шт.

Обновлено 03:00 01.03.2021

924,80 ₽ от 1 шт.

841,56 ₽ от 10 шт.

797,64 ₽ от 25 шт.

754,87 ₽ от 50 шт.

721,34 ₽ от 100 шт.

683,19 ₽ от 250 шт.

628,86 ₽ от 500 шт.

Classic Components

На складе 15 шт.

Обновлено 22:47 24.02.2021

Цена по запросу.

Технические характеристики Analog Devices ADL5324ARKZ-R7, атрибуты и параметры.

Частота:

4.00 GHz (max)

Усиление:

12.0 dB

Lead-Free Status:

Contains Lead

Статус жизненного цикла:

Active

Mounting Style:

Surface Mount

Рабочая Температура:

-40.0 °C to 105 °C

Упаковка:

Reel

Количество выводов:

Positive Supply Voltage:

3.30 V (min)

REACH SVHC Compliance:

No SVHC

RoHS:

Compliant

Supply Current:

140 mA

Supply Voltage (DC):

5.25 V (max), 3.45 V (max), 3.15 V (min)

RF Amp Single Driver Amp 4GHz 5.25V 4-Pin(3+Tab) SOT-89 T/R
Rf, Amp, 400Mhz-4Ghz, 0.5W, Sot89
Frequency Min:400Mhz
Frequency Max:4Ghz
Gain:12Db
Noise Figure Typ:4.4Db
Rf Ic Case Style:sot-89
Количество контактов: 3 контакта
Мин. Напряжение питания: 3,15 В
Максимальное напряжение питания: 3,45 В
Соответствие нормам рабочей температуры: Да
The ADL5324 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V, without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performance to the specific needs of the design. This feature also creates the opportunity for dynamic biasing of the driver amplifier where a variable supply is used to allow for full 5 V biasing under large signal conditions, and then reduced supply voltage when signal levels are smaller and lower power consumption is desirable. This scalability reduces the need to evaluate and inventory multiple driver amplifiers for different output power requirements, from 25 dBm to 29 dBm output power levels. The ADL5324 is also rated to operate across the wide temperature range of -40°C to +105°C for reliable performance in designs that experience higher temperatures, such as power amplifiers. The ½ W driver amplifier also covers the wide frequency range of 400 MHz to 4000 MHz, and only requires a few external components to be tuned to a specific band within that wide range. This high performance broadband RF driver amplifier is well suited for a variety of wired and wireless applications, including cellular infrastructure, ISM band power amplifiers, defense equipment, and instrumentation equipment. A fully populated evaluation board is available. The ADL5324 also delivers excellent ACPR vs. output power and bias voltage. The driver can deliver greater than 17 dBm of output power at 2140 MHz, while achieving an ACPR of -55 dBc at 5 V. If the bias is reduced to 3.3 V, the -55 dBc ACPR output power only minimally reduces to 15 dBm. Applications Wireless infrastructure Automated test equipment ISM/AMR applications