Компоненты  »  Интегральные схемы (ИС)  »  РЧ полупроводники и устройства  »  РЧ усилители

Analog Devices
ADL5602ARKZ-R7

Чип РЧ-усилителя Одиночный GP 4GHz 5.5V 4-Pin (3 + Tab) SOT-89 T / R

Цена от 229,74 ₽ до 1 387,20 ₽

Наличие Analog Devices ADL5602ARKZ-R7 на складах.

Дистрибьютор
Наличие и цена

Технические характеристики Analog Devices ADL5602ARKZ-R7, атрибуты и параметры.

Частота:
4.00 GHz (max)
Усиление:
18.5 dB
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Negative Supply Voltage:
0.00 V (max)
Рабочая Температура:
-40.0 °C (min)
Упаковка:
Cut Tape (CT)
Количество выводов:
3
Positive Supply Voltage:
4.50 V (min)
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
Supply Current:
89.0 mA
Supply Voltage (DC):
4.50 V (min), 5.50 V (max)
  • Чип РЧ-усилителя Одиночный GP 4GHz 5.5V 4-Pin (3 + Tab) SOT-89 T / R
  • ВЧ УСИЛИТЕЛЬ, 18,5 ДБ, 4 ГГЦ, 5,5 В, SOT-89-3, ПОЛНЫЙ БАРАБАН
  • Усилитель ВЧ, 18,5 дБ, 4 ГГц, 5,5 В, Sot-89-3
  • Частота Мин: 50 МГц
  • Frequency Max:4Ghz
  • Прирост: 18,3 дБ
  • Noise Figure Typ:2.9Db
  • Rf Ic Case Style:sot-89
  • Количество контактов: 3 контакта
  • Мин. Напряжение питания: 4,5 В
  • Максимальное напряжение питания: 5,5 В
  • Ассортимент продукции: - Соответствие Rohs: Да
  • The ADL5602 is a broadband 20 dB linear amplifier that operates at frequencies up to 4 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment. The ADL5602 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3 specifications simultaneously, across the entire 4 GHz frequency range. The ADL5602 provides a gain of 20 dB, which is stable over frequency, temperature, power supply, and from device to device. The device is internally matched to 50 O at the input and output, making the ADL5602 very easy to implement in a wide variety of applications. Only input/output ac coupling capacitors, power supply decoupling capacitors, and an external inductor are required for operation. The ADL5602 is fabricated on an InGaP HBT process and has an ESD rating of ±1.5 kV (Class 1C). The device is available in a thermally efficient SOT-89 package. The ADL5602 consumes 89 mA on a single 5 V supply and is fully specified for operation from -40°C to +85°C. A fully populated RoHS-compliant evaluation board is available.

Документы по Analog Devices ADL5602ARKZ-R7, инструкции, описания, datasheet.

Товары похожие на Analog Devices ADL5602ARKZ-R7, сравнение характеристик.