Компоненты  »  Интегральные схемы (ИС)  »  Интерфейсные ИС  »  ИС интерфейсов RS-232 / RS-422 / RS-485

Analog Devices
ADM488AN

Один передатчик / приемник RS-422 / RS-485 8-контактный PDIP

Наличие Analog Devices ADM488AN на складах.

Склад
Наличие и цена
Европа 2
В наличии до 142 шт.
MOQ от 1 шт.
Германия
На складе 142 шт.
Обновлено 15:30 05.03.2021
Цена по запросу.
Британия
На складе 18 шт.
MOQ 1 шт.
Обновлено 22:27 05.03.2021
Цена по запросу.

Технические характеристики Analog Devices ADM488AN, атрибуты и параметры.

Тип корпуса / Кейс:
SOIC
Скорость передачи данных:
250 kbps
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Obsolete
Mounting Style:
Through Hole
Рабочая Температура:
-40.0 °C to 85.0 °C
Упаковка:
Tube
Количество выводов:
8
Positive Supply Voltage:
4.50 V (min)
REACH SVHC Compliance:
No SVHC
RoHS:
Non-Compliant
Supply Current:
74.0 µA (max)
Supply Voltage (DC):
5.00 V (max)
  • Один передатчик / приемник RS-422 / RS-485 8-контактный PDIP
  • CMOS BUS TRANSCEIVER, DIP8, 488
  • Case Style:DIP
  • Количество контактов: 8
  • Диапазон рабочих температур: от -40 ° C до + 85 ° C
  • Temp, Op. Max:85°C
  • Темп, соч. Мин .: -40 ° C
  • Base Number:488
  • IC Generic Number:488
  • Logic Function Number:488
  • Interface Type:RS-485 / RS-422
  • Line/Bus Driver/Receiver/Transceiver Type:Differential
  • The ADM488 and ADM489 are low power differential line transceiver suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both EIA Standards RS-485 and RS-422. Both products contains a single differential line driver and a single differential line receiver making them suitable for full duplex data transfer. The ADM489 contains an additional receiver and driver enable control. The input impedance is 12 kohms, allowing 32 transceivers to be connected on the bus. The ADM488/ADM489 operates from a single +5 V ± 10% power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry. The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating). The ADM488/ADM489 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. The ADM488/ADM489 is fully specified over the industrial temperature range and is available in DIP, SOIC and TSSOP packages.

Документы по Analog Devices ADM488AN, инструкции, описания, datasheet.

Товары похожие на Analog Devices ADM488AN, сравнение характеристик.