Analog Devices
ADM697ARZ
Processor Supervisor Adj 1 Active High/Active Low/Push-Pull Automotive 16-Pin SOIC W Tube
Цена от 417,82 ₽ до 771,70 ₽
Наличие Analog Devices ADM697ARZ на складах.
Дистрибьютор
Наличие и цена
На складе 420 шт.
Обновлено 10:10 11.02.2021
На складе 162 шт.
MOQ 1 шт.
Обновлено 14:29 10.02.2021
Упаковка Tube На складе 20 шт.
MOQ 1 шт.
Обновлено 19:43 10.02.2021
Упаковка Tube На складе 178 шт.
MOQ 2 шт.
Обновлено 17:52 10.02.2021
На складе 178 шт.
MOQ 1 шт.
Обновлено 16:32 10.02.2021
На складе 1128 шт.
MOQ 141 шт.
Обновлено 17:52 10.02.2021
На складе 17908 шт.
Обновлено 13:00 10.02.2021
Цена по запросу.
Технические характеристики Analog Devices ADM697ARZ, атрибуты и параметры.
Тип корпуса / Кейс:
SOIC
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mil-Spec:
No
Mounting Style:
Surface Mount
Рабочая Температура:
85.0 °C (max)
Упаковка:
Tube, Bulk
Количество выводов:
16
Positive Supply Voltage:
3.00 V (min)
Рассеяние мощности:
600 mW
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
Supply Current:
1.00 mA
Supply Voltage (DC):
5.50 V (max)
Пороговое напряжение:
1.30 V
- Processor Supervisor Adj 1 Active High/Active Low/Push-Pull Automotive 16-Pin SOIC W Tube
- Processor Supervisor Adjustable Volt 1950ua 16 Pin SOIC 10mm
- The ADM696/ADM697 supervisory circuits offer complete single chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include µP reset, backup-battery switchover, watchdog timer, CMOS RAM write protection, and power failure warning. The ADM696/ADM697 are available in 16-pin DIP and small outline packages and provide the following functions: Power-On Reset output during power-up, power-down and brownout conditions. The RESET voltage threshold is adjustable using an external voltage divider. The RESET output remains operational with VCC as low as 1 V. A Reset pulse if the optional watchdog timer has not been toggled within specified time. Separate watchdog time-out and low line status outputs. Adjustable reset and watchdog timeout periods. A 1.3 V threshold detector for power fail warning, low battery detection, or to monitor a power supply other than VCC. Battery backup switching for CMOS RAM, CMOS micro-processor or other low power logic (ADM696). Write protection of CMOS RAM or EEPROM (ADM697). The ADM696/ADM697 is fabricated using an advanced epitaxial CMOS process combining low power consumption (5 mW), extremely fast Chip Enable gating (5 ns) and high reliability. RESET assertion is guaranteed with VCC as low as 1 V. In addition, the power switching circuitry is designed for minimal voltage drop thereby permitting increased output current drive of up to 100 mA without the need for an external pass transistor.