Analog Devices
ADXL206HDZ
Accelerometer Dual ±5g 4.75V to 5.25V 296mV/g to 328mV/g 8-Pin SBDIP Tube
Цена от 70 479,11 ₽ до 73 395,14 ₽
Наличие Analog Devices ADXL206HDZ на складах.
Дистрибьютор
Наличие и цена
Технические характеристики Analog Devices ADXL206HDZ, атрибуты и параметры.
Тип корпуса / Кейс:
CDIP
Lead-Free Status:
Lead Free
Статус жизненного цикла:
Active
Mounting Style:
Through Hole
Рабочая Температура:
-40.0 °C to 175 °C
Упаковка:
Tube
Количество выводов:
8
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
Supply Current:
700 µA
Supply Voltage (DC):
4.75 V (min), 5.25 V (max)
- Accelerometer Dual ±5g 4.75V to 5.25V 296mV/g to 328mV/g 8-Pin SBDIP Tube
- ACCELEROMETER, DUAL-AXIS, IMEMS, 8SBDIP
- Acceleration Range:± 5g
- Количество осей: 2
- Sensor Case Style:SBDIP
- Количество контактов: 8
- Диапазон напряжения питания: от 4,75 до 5,25 В
- Operating Temperature Range:-40°C to +175°C
- SVHC: Нет SVHC (18 июня 2012 г.)
- The ADXL206 is a precision, low power, complete dual-axis iMEMS® accelerometer for use in high temperature environments. The accelerometer integrates the sensor with signal conditioned voltage outputs on a single, monolithic IC. The ADXL206 measures acceleration with a full-scale range of ±5 g. The ADXL206 can measure both dynamic acceleration (for example, vibration) and static acceleration (for example, gravity). The typical noise floor is 110 μg/√Hz, allowing signals below 1 mg (0.06° of inclination) to be resolved in tilt sensing applications using narrow bandwidths (<60 Hz). The user selects the bandwidth of the accelerometer using Capacitors CX and CY at the XOUT and YOUT pins, respectively. Bandwidths of 0.5 Hz to 2.5 kHz can be selected to suit the application. The ADXL206 is available in a 13 mm × 8 mm × 2 mm, 8-lead, side-brazed ceramic dual in-line package (SBDIP). APPLICATIONS Geological exploration tilt and vibration measurement Extreme high temperature industrial products
