Компоненты  »  Датчики  »  Датчики движения  »  Акселерометры

Analog Devices
ADXL362BCCZ-RL

Micropower, 3-Axis, 2g/4g/8g Digital Output MEMS Accelerometer | ACCELEROMETER 2-8G SPI 16LGA

Цена от 193,04 ₽ до 701,72 ₽

Наличие Analog Devices ADXL362BCCZ-RL на складах.

Дистрибьютор
Наличие и цена
Mouser
На складе 1478 шт.
MOQ 1 шт.
Обновлено 19:25 03.03.2021
Упаковка Tape & Reel
701,72 ₽ от 1 шт.
634,31 ₽ от 10 шт.
545,91 ₽ от 50 шт.
524,91 ₽ от 100 шт.
397,83 ₽ от 1000 шт.
392,30 ₽ от 10000 шт.
Hamilton Americas
На складе 26 шт.
Обновлено 16:58 28.02.2021
Цена по запросу.
Win Source Electronics
На складе 30000 шт.
MOQ 23 шт.
Обновлено 13:14 03.03.2021
285,94 ₽ от 23 шт.
235,99 ₽ от 55 шт.
228,75 ₽ от 85 шт.
221,63 ₽ от 115 шт.
214,52 ₽ от 150 шт.
193,04 ₽ от 200 шт.
LCSC
На складе 9968 шт.
MOQ 1 шт.
Обновлено 23:27 02.03.2021
400,97 ₽ от 1 шт.
304,37 ₽ от 10 шт.
286,74 ₽ от 30 шт.
268,91 ₽ от 100 шт.
261,07 ₽ от 500 шт.
257,15 ₽ от 1000 шт.
Ampacity Systems
На складе 410 шт.
Обновлено 17:16 27.02.2021
Цена по запросу.

Технические характеристики Analog Devices ADXL362BCCZ-RL, атрибуты и параметры.

Lead-Free Status:
Lead Free
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Рабочая Температура:
-40.0 °C to 85.0 °C
Упаковка:
Tape & Reel (TR)
Количество выводов:
16
RoHS:
Compliant
Supply Current:
1.80 µA
  • Micropower, 3-Axis, 2g/4g/8g Digital Output MEMS Accelerometer | ACCELEROMETER 2-8G SPI 16LGA
  • Accelerometer Triple ±2/±4/±8g 1.6V to 3.6V 16-Pin LGA T/R
  • There is an ADXL362 variant called ADXL362-MI which is applicable to medical implantable and other Class III devices. The ADXL362 is an ultralow power, 3-axis MEMS accelerometer that consumes less than 2 µA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL362 does not alias input signals by undersampling
  • it samples the full bandwidth of the sensor at all data rates. The ADXL362 always provides 12-bit output resolution
  • 8-bit formatted data is also provided for more efficient single-byte transfers when a lower resolution is sufficient. Measurement ranges of ±2 g, ±4 g, and ±8 g are available, with a resolution of 1 mg/LSB on the ±2 g range. For applications where a noise level lower than the normal 550 µg/√Hz of the ADXL362 is desired, either of two lower noise modes (down to 175 µg/√Hz typical) can be selected at minimal increase in supply current. In addition to its ultralow power consumption, the ADXL362 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and several activity detection modes including adjustable threshold sleep and wake-up operation that can run as low as 270 nA at a 6 Hz (approximate) measurement rate. A pin output is provided to directly control an external switch when activity is detected, if desired. In addition, the ADXL362 has provisions for external control of sampling time and/or an external clock. The ADXL362 operates on a wide 1.6 V to 3.5 V supply range, and can interface, if necessary, to a host operating on a separate, lower supply voltage. The ADXL362 is available in a 3 mm × 3.25 mm × 1.06 mm package. Refer to the ADXL362-MI data sheet for information on ADXL362-MI. The ADXL362-MI is processed through a special, high reliability manufacturing flow involving additional process, test, and quality controls to meet the quality and reliability requirements of implantable and other Class III medical devices. For more information please contact Analog Devices Sales. Applications Hearing aids Home healthcare devices Motion enabled power save switches Wireless sensors Motion enabled metering devices Class III medical implantable

Документы по Analog Devices ADXL362BCCZ-RL, инструкции, описания, datasheet.

Товары похожие на Analog Devices ADXL362BCCZ-RL, сравнение характеристик.