Analog Devices
EVAL-ADUCM331QSPZ
ADuCM330/ADuCM331 Microcontroller Development Board 96KB Flash Win Automotive
Цена от 10 954,58 ₽ до 12 701,60 ₽
Наличие Analog Devices EVAL-ADUCM331QSPZ на складах.
Склад
Наличие и цена
В наличии до 5 шт.
MOQ от 1 шт.
Цена от 10 954,58 ₽ до 12 701,60 ₽
На складе 2 шт.
MOQ 1 шт.
Обновлено 14:10 23.02.2021
Упаковка Box На складе 3 шт.
MOQ 1 шт.
Обновлено 19:38 22.02.2021
Упаковка Bulk На складе 5 шт.
MOQ 1 шт.
Обновлено 17:48 23.02.2021
Технические характеристики Analog Devices EVAL-ADUCM331QSPZ, атрибуты и параметры.
Основная архитектура:
ARM
Core Sub-Architecture:
Cortex-M3
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Pre-Release
Количество бит:
32
Количество выводов:
0
RoHS:
Compliant
- ADuCM330/ADuCM331 Microcontroller Development Board 96KB Flash Win Automotive
- ADUCM331 Multichannel Sigma-Delta ADC with 32-Bit ARM Cortex M3 Microcontroller Evaluation Board
- Evaluation Board, Cortex-M3 Mcu
- The ADuCM331 is a fully integrated, 8 kSPS, data acquisition system that incorporates dual, high performance multichannel sigma-delta (Σ-Δ) ADCs, 32-bit ARM® Cortex™-M3 processor and flash. The ADuCM331 has 128 kB program flash. and 4 kB data flash. The ADuCM331 is a complete system solution for battery monitoring in 12 V automotive applications. The ADuCM331 integrates all of the required features to precisely and intelligently monitor, process, and diagnose 12 V battery parameters including battery current, voltage, and temperature over a wide range of operating conditions. Minimizing external system components, the device is powered directly from a 12 V battery. On-chip, low dropout (LDO) regulators generate the supply voltage for two integrated Σ-Δ ADCs. The ADCs precisely measure battery current, voltage, and temperature to characterize the state of the health and the charge of the car battery. The device operates from an on chip, 16.384 MHz high frequency oscillator that supplies the system clock. This clock is routed through a programmable clock divider from which the core clock operating frequency is generated. The device also contains a 32 kHz oscillator for low power operation. The analog subsystem consists of an ADC with a programmable gain amplifier (PGA) that allows the monitoring of various current and voltage ranges. It also includes a precision reference on-chip. The ADuCM331 integrates a range of on-chip peripherals that can be configured under core software control as required in the application. These peripherals include a SPI serial input/output communication controller, six GPIO pins, one general-purpose timer, a wake-up timer, and a watchdog timer. The ADuCM331 is specifically designed to operate in battery-powered applications where low power operation is critical. The microcontroller core can be configured in normal operating mode, resulting in an overall system current consumption of <18.5 mA when all peripherals are active. The device can also be configured in a number of low power operating modes under direct program control, consuming <100 µA. The ADuCM331 also includes a LIN physical interface for single wire, high voltage communications in automotive environments. The device operates from an external 3.6 V to 18 V (on VDD, Pin 26) voltage supply and is specified over the −40°C to +115°C temperature range, with additional typical specifications at +125°C. APPLICATIONS Battery sensing/management for automotive and light mobility vehicles Lead-acid battery measurement for power supplies in industrial and medical domains
Документы по Analog Devices EVAL-ADUCM331QSPZ, инструкции, описания, datasheet.
Товары похожие на Analog Devices EVAL-ADUCM331QSPZ, сравнение характеристик.
Основная архитектура ARM.
Core Sub-Architecture Cortex-M4.
Lead-Free Status Lead Free.
Статус жизненного цикла Pre-Release.
Количество бит 32.
RoHS Compliant.