Analog Devices
TMP01FPZ
IC SENSOR TEMP/CONTROLLER 8DIP / Temp Sensor Analog 8-Pin PDIP N Tube
Цена от 399,88 ₽ до 1 872,82 ₽
Наличие Analog Devices TMP01FPZ на складах.
Дистрибьютор
Наличие и цена
На складе 100 шт.
Обновлено 10:24 08.02.2021
На складе 12 шт.
MOQ 2 шт.
Обновлено 17:46 09.02.2021
На складе 13 шт.
MOQ 1 шт.
Обновлено 16:10 09.02.2021
На складе 3 шт.
Обновлено 09:57 09.02.2021
На складе 842 шт.
MOQ 1 шт.
Обновлено 19:29 08.02.2021
Упаковка Tube На складе 145 шт.
MOQ 1 шт.
Обновлено 14:40 09.02.2021
Упаковка Tube На складе 2900 шт.
MOQ 100 шт.
Обновлено 17:46 09.02.2021
На складе 150 шт.
Обновлено 11:48 04.02.2021
На складе 5 шт.
Обновлено 20:05 05.02.2021
Цена по запросу.
На складе 261 шт.
Обновлено 18:59 05.02.2021
Цена по запросу.
На складе 1321 шт.
MOQ 11 шт.
Обновлено 09:24 07.02.2021
На складе 6 шт.
MOQ 1 шт.
Обновлено 10:23 04.02.2021
На складе 116 шт.
MOQ 1 шт.
Обновлено 01:31 09.02.2021
На складе 39 шт.
MOQ 1 шт.
Обновлено 01:31 09.02.2021
Технические характеристики Analog Devices TMP01FPZ, атрибуты и параметры.
Тип корпуса / Кейс:
DIP
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Through Hole
Рабочая Температура:
-55.0 °C to 125 °C
Выходной ток:
2.00 mA
Выходное напряжение:
1.49 V
Упаковка:
Bulk
Количество выводов:
8
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
Supply Current:
400 µA
Supply Voltage (DC):
4.50 V (min), 13.2 V (max)
- IC SENSOR TEMP/CONTROLLER 8DIP / Temp Sensor Analog 8-Pin PDIP N Tube
- Temperature Sensor IC
- Output Voltage:1.49V
- Мин. Напряжение питания: 4,5 В
- Supply Voltage Max:13.2V
- Упаковка / футляр: 8-DIP
- Количество контактов: 8
- Диапазон рабочих температур: от -55 ° C до + 125 ° C
- IC Generic Number:01
- Operating Temp. Max:150°C
- Соответствует RoHS: Да
- The TMP01 is a temperature sensor that generates a voltage output proportional to absolute temperature and a control signal from one of two outputs when the device is either above or below a specific temperature range. Both the high/low temperature trip points and hysteresis (overshoot) band are determined by user-selected external resistors. For high volume production, these resistors are available on board. The TMP01 consists of a band gap voltage reference combined with a pair of matched comparators. The reference provides both a constant 2.5 V output and a voltage proportional to absolute temperature (VPTAT) which has a precise temperature coefficient of 5 mV/K and is 1.49 V (nominal) at 25°C. The comparators compare VPTAT with the externally set tempera-ture trip points and generate an open-collector output signal when one of their respective thresholds has been exceeded. Hysteresis is also programmed by the external resistor chain and is determined by the total current drawn out of the 2.5 V reference. This current is mirrored and used to generate a hysteresis offset voltage of the appropriate polarity after a comparator has been tripped. The comparators are connected in parallel, which guarantees that there is no hysteresis overlap and eliminates erratic transitions between adjacent trip zones. The TMP01 utilizes proprietary thin-film resistors in conjunc-tion with production laser trimming to maintain a temperature accuracy of ±1°C (typical) over the rated temperature range, with excellent linearity. The open-collector outputs are capable of sinking 20 mA, enabling the TMP01 to drive control relays directly. Operating from a 5 V supply, quiescent current is only 500 μA (max). The TMP01 is available in 8-pin mini PDIP, SOIC, and TO-99 packages. Applications Over/under temperature sensor and alarm Board-level temperature sensing Temperature controllers Electronic thermostats Thermal protection HVAC systems Industrial process control Remote sensors
