Компоненты  »  Оптоэлектроника  »  Оптопары

Broadcom
HCPL-3150

Optocoupler Drive Push-Pull 1-CH 30V 1500V 8-Pin PDIP

Цена от 201,75 ₽ до 494,80 ₽

Наличие Broadcom HCPL-3150 на складах.

Склад
Наличие и цена
Америка 4
В наличии до 1740 шт.
MOQ от 1 шт.
Цена от 201,75 ₽ до 494,80 ₽
США
На складе 1740 шт.
MOQ 50 шт.
Обновлено 02:47 06.02.2021
223,78 ₽ от 50 шт.
218,91 ₽ от 60 шт.
215,64 ₽ от 110 шт.
212,37 ₽ от 250 шт.
209,10 ₽ от 500 шт.
205,43 ₽ от 2500 шт.
201,75 ₽ от 5000 шт.
США
На складе 358 шт.
MOQ 1 шт.
Обновлено 19:32 05.02.2021
Упаковка Tube
456,65 ₽ от 1 шт.
360,16 ₽ от 10 шт.
360,16 ₽ от 50 шт.
276,01 ₽ от 100 шт.
209,81 ₽ от 1000 шт.
201,96 ₽ от 10000 шт.
США
На складе 84 шт.
MOQ 1 шт.
Обновлено 14:21 07.02.2021
Упаковка Tube
494,80 ₽ от 1 шт.
349,61 ₽ от 10 шт.
286,39 ₽ от 100 шт.
241,43 ₽ от 500 шт.
221,45 ₽ от 1000 шт.
212,29 ₽ от 2000 шт.
212,06 ₽ от 5000 шт.
США
На складе 658 шт.
Обновлено 17:26 01.02.2021
Цена по запросу.
Азия 3
В наличии до 1000 шт.
MOQ от 21 шт.
Цена от 215,48 ₽ до 319,35 ₽
Китай
На складе 1000 шт.
MOQ 21 шт.
Обновлено 09:24 07.02.2021
319,35 ₽ от 21 шт.
263,48 ₽ от 50 шт.
255,48 ₽ от 80 шт.
247,48 ₽ от 105 шт.
239,48 ₽ от 135 шт.
215,48 ₽ от 180 шт.
Малайзия
На складе 17 шт.
Обновлено 19:06 31.01.2021
Цена по запросу.
Израиль
На складе 280 шт.
Обновлено 15:57 26.01.2021
Цена по запросу.

Технические характеристики Broadcom HCPL-3150, атрибуты и параметры.

Тип корпуса / Кейс:
DIP
Входной ток:
25.0 mA (max)
Input Voltage (DC):
1.50 V
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Active
Mounting Style:
Through Hole
Количество каналов:
1
Рабочая Температура:
100 °C (max)
Упаковка:
Tube
Количество выводов:
8
Время нарастания:
100 ns
RoHS:
Non-Compliant
  • Optocoupler Drive Push-Pull 1-CH 30V 1500V 8-Pin PDIP
  • 0.5 Amp Output Current IGBT Gate Drive Optocoupler
  • OPTOCOUPLER GATE DRIVE 0.6A 8DIP
  • OptoCouplers & OptoIsolators 0.5A IGBT Gate Drive
  • OPTOISO 3.75KV 1CH GATE DVR 8DIP
  • The HCPL-3000 consists of a Silicon-doped Ga As LED optically coupled to an integrated circuit with a power output stage. This optocoupler is suited for driving power bipolar transistors and power Darlington devices used in motor control inverter applications. The high peak and steady state current capabilities of the output stage allow for direct interfacing to the power device without the need for an inter me-diate amplifier stage. With a CMR rating of 1.5 kV/us this optocoup-ler readily rejects transients found in inverter applications. The LED controls the state of the output stage. Transistor Q2 in the output stage is on with the Le Doff, allowing the base of the power device to be held low. Turning on the LED turns off transistor Q2 and switches on transistor Q1 in the output stage which provides current to drive the base of a power bipolar device. Functional Diagram CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. THE USE OF A 0.1uF BYPASS CAPACITOR CONNECTED BETWEEN PINS 8 AND 7 IS RECOMMENDED. ALSO, CURRENT LIMITING RESISTORS ARE RECOMMENDED (SEE FIGURE 1, NOTE 2, AND NOTE 7).

Документы по Broadcom HCPL-3150, инструкции, описания, datasheet.

Товары похожие на Broadcom HCPL-3150, сравнение характеристик.