Компоненты » Датчики » Датчики температуры и влажности

Honeywell
HIH-4000-002

Sensor; + 3.5% RH (0-100 % RH Non-Condensing); + 2% RH (Typ.) @ 50% RH

Цена от 1 066,32 ₽ до 5 685,25 ₽

Datasheet

Наличие Honeywell HIH-4000-002 на складах.

Дистрибьютор

Наличие и цена

Технические характеристики Honeywell HIH-4000-002, атрибуты и параметры.

Mounting Style:

Through Hole

Рабочая Температура:

-40.0 °C to 85.0 °C

Количество выводов:

REACH SVHC Compliance:

No SVHC

RoHS:

Compliant

Supply Current:

500 µA

Supply Voltage (DC):

5.80 V, 5.80 V (max)

Датчик
+ 3.5% RH (0-100 % RH Non-Condensing)
+ 2% RH (Typ.) @ 50% RH
Датчик влажности Аналоговый 3-контактный SIP
Humidity Sensor
Sensing Accuracy:3.5%
Выход датчика: напряжение
Humidity Range:0 to 100% RH
Клеммы датчика: сквозное отверстие
Supply Voltage Max:5.8VDC
Accuracy:+/-3.5 %RH
Lead Spacing:0.050"
Соответствует RoHS: Да
Humidity Sensor, 1.27mm SIP
Sensing Accuracy:3.5%
Humidity Range:0% to 100%
Sensor Terminals:Pin
Response Time:15s
Capacitance:0µF
Supply Voltage Range:4V to 5.8V
SVHC: Нет SVHC (20 июня 2011 г.)
Accuracy:3.5
Accuracy %:3.5%
Contact Configuration:1.27mm (0.050 in) Lead Pitch
External Depth:2.03mm
External Length / Height:22.17mm
External Width:4.27mm
Humidity Measuring Ranges:0 to 100%
Hysteresis:3%
Расстояние между выводами: 1,27 мм
Measuring Range:0 to 100%
Количество контактов: 3
Максимальная рабочая температура: 85 ° C
Минимальная рабочая температура: -40 ° C
Output:Analog Voltage
Повторяемость: 0,5%
Series:HIH4000
Supply Current:500µA
Supply Voltage:5.8VDC
Supply Voltage Max:5.8VDC
Supply Voltage Min:4.0VDC
HIH-4000 Series integrated circuit humidity sensor, 1,27 mm [0.050 in] lead pitch SIP The HIH-4000 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or other device is made possible by this sensor’s near linear voltage output. With a typical current draw of only 200 µA, the HIH-4000 Series is often ideally suited for low drain, battery operated systems. Tight sensor interchangeability reduces or eliminates OEM production calibration costs. Individual sensor calibration data is available. The HIH-4000 Series delivers instrumentation-quality RH (Relative Humidity) sensing performance in a competitively priced, solderable SIP (Single In-line Package). Available in two lead spacing configurations, the RH sensor is a laser trimmed, thermoset polymer capacitive sensing element with on-chip integrated signal conditioning. The sensing element's multilayer construction provides excellent resistance to most application hazards such as wetting, dust, dirt, oils and common environmental chemicals.