Honeywell
HSCDANN004NG2A3

Sensor; TruStability; Pressure; DIP; 4 in H2O Gauge; I2C; 3.3 V Supply

Цена от 4 348,01 ₽ до 5 386,90 ₽

Datasheet

Наличие Honeywell HSCDANN004NG2A3 на складах.

Дистрибьютор

Наличие и цена

Chip One Stop Japan

На складе 50 шт.

MOQ 1 шт.

Обновлено 11:21 02.03.2021

Упаковка Bulk

4 394,02 ₽ от 1 шт.

4 359,51 ₽ от 5 шт.

4 348,01 ₽ от 25 шт.

Verical

На складе 50 шт.

MOQ 1 шт.

Обновлено 17:40 02.03.2021

5 386,90 ₽ от 1 шт.

5 344,59 ₽ от 5 шт.

5 330,49 ₽ от 25 шт.

Технические характеристики Honeywell HSCDANN004NG2A3, атрибуты и параметры.

Тип корпуса / Кейс:

DIP

Mounting Style:

Through Hole

Рабочая Температура:

0.00 °C (min)

REACH SVHC Compliance:

No SVHC

RoHS:

Compliant

Supply Current:

1.60 mA

Номинальное напряжение (постоянный ток):

3.30 V

Датчик
TruStability
Давление
DIP
4 in H2O Gauge
I2C
3.3 V Supply
Pressure Sensor 0inH2O to 4inH2O Gage Medical 8-Pin DIP Module
PRESSURE SENSOR, 0 TO 4INCH-H2O, 1
Operating Pressure Range:0inch-H2O to 4inch-H2O
Sensor Output:Digital
Supply Current:1.6mA
Voltage Rating:3.3V
Port Style:Axial
Тип измерения давления: манометр
Sensor Interface:PCB Mount
SENSOR, TRUSTABILITY, 4IN H2O, 3.3V, DIP
SVHC: Нет SVHC (20 июня 2011 г.)
Accuracy:±0.25%
Input Type:Axial, single port
Operating Temperature Range:0°C to +150°C
Output Type:Digital
Тип давления: манометр
Supply Voltage V DC:3.3V
Termination Type:DIP
TruStability™ HSC Series-High Accuracy, digital I²C address: 0x28, DIP AN: single axial barbed port, gage, 0 inH2O to 4 inH2O, 3.3 Vdc The TruStability™ High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. The HSC Series is calibrated over the temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between the two pressure ports. The TruStability™ pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O. All products are designed and manufactured according to ISO 9001 standards.