Honeywell
TSCDANN150PGUCV

Датчик давления TruStability® для монтажа на плате: серия TSC, точность ± 0,15%

Datasheet

Наличие Honeywell TSCDANN150PGUCV на складах.

Склад

Наличие и цена

Европа 1

В наличии до 220 шт.

MOQ от 100 шт.

Британия

На складе 220 шт.

Обновлено 01:05 01.03.2021

Цена по запросу.

Технические характеристики Honeywell TSCDANN150PGUCV, атрибуты и параметры.

Тип корпуса / Кейс:

DIP

Lead-Free Status:

Lead Free

Mounting Style:

Through Hole

Рабочая Температура:

0.00 °C to 85.0 °C

REACH SVHC Compliance:

No SVHC

RoHS:

Compliant

Supply Current:

600 µA

Номинальное напряжение (постоянный ток):

5.00 V

Датчик давления TruStability® для монтажа на плате: серия TSC, точность ± 0,15%
Pressure Sensor 0psi to 150psi Gage 8-Pin DIP Module
Board Mount Pressure Sensors DIP, Sing Ax Barbed Gage, Const Voltage
Sens
Unamp
Comp
TSC
DIP
Single Axial Barbed Port
Сухие газы
0-150 psi
Gage
TruStability™ TSC Series, Compensated/Unamplified, analog, DIP AN: single axial barbed port, gage, 0 psi to 150 psi Honeywell TruStability™ TSC Series are piezoresistive silicon pressure sensors offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. Temperature compensated and unamplified Compensation makes it easier to integrate the sensor into a system by eliminating the need to calibrate the system over temperature and also offers reduced part-to-part variation Compensated temperature range is 0 °C to 85 °C [-32 °F to 185 °F] Operating temperature range is -40 °C to 85 °C [-40 °F to 185 °F] Measures differential or gage pressures The differential versions allow measurement of pressure between two pressure ports. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. The TSC Series sensors are intended for use with non-corrosive, non-ionic gases, such as air. Port 1 can also be used for non-corrosive, non-ionic liquids on sensors rated above 60 mbar | 6 kPa | 1 psi. The TSC Series offer numerous package styles and mounting options, making it easier for device manufacturers to integrate the product into their applications. These sensors offer infinite resolution on the pressure signal. Frequency response is also typically limited only by the end user’s system. All products are designed and manufactured according to ISO 9001.