Наличие Infineon BTS3160DAUMA1 на складах.
Склад
Наличие и цена
В наличии до 2455 шт.
MOQ от 1 шт.
Цена от 114,93 ₽ до 332,40 ₽
На складе 2400 шт.
MOQ 1 шт.
Обновлено 22:29 04.03.2021
На складе 990 шт.
MOQ 2500 шт.
Обновлено 23:28 03.03.2021
На складе 1902 шт.
Обновлено 07:20 22.02.2021
Цена по запросу.
На складе 2455 шт.
Обновлено 14:32 04.03.2021
Цена по запросу.
В наличии до 864 шт.
MOQ от 1 шт.
Цена от 183,24 ₽ до 439,02 ₽
На складе 35 шт.
MOQ 1 шт.
Обновлено 14:54 04.03.2021
Упаковка Cut Tape (1 шт.) На складе 864 шт.
MOQ 1 шт.
Обновлено 23:27 02.03.2021
В наличии до 3750 шт.
MOQ от 100 шт.
Цена от 189,63 ₽ до 303,41 ₽
На складе 15 шт.
Обновлено 17:16 03.03.2021
На складе 874 шт.
Обновлено 21:34 21.02.2021
Цена по запросу.
На складе 406 шт.
Обновлено 16:40 28.02.2021
Цена по запросу.
На складе 3750 шт.
Обновлено 19:22 22.02.2021
Цена по запросу.
На складе 1768 шт.
Обновлено 14:32 04.03.2021
Цена по запросу.
Технические характеристики Infineon BTS3160DAUMA1, атрибуты и параметры.
Input Voltage (DC):
40.0 V
Lead-Free Status:
Lead Free
Mounting Style:
Surface Mount
Количество выходов:
1
Рабочая Температура:
-40.0 °C (min)
Упаковка:
Cut Tape (CT)
Количество выводов:
5
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
- BTS3160D Series 45 V 7.8 A 10 mOhm Smart Low Side Power Switch - TO-252-5
- Power Field-Effect Transistor, 7.8A I(D), 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA
- The BTS3160D is a latching one channel low-side power switch in PG-TO-252-5-13 package providing embedded protective functions, PG-TO252-5, RoHS
- Power Load Sw, Low Side, 40V, To-252-5
- Power Load Switch Type:low Side
- Input Voltage:40V
- Current Limit:70A
- On State Resistance:0.008Ohm
- Distribution Switch Case Style:to-252
- Количество контактов: 5 контактов
- Тепловая защита: да
- On / Rohs Compliant: Yes
- The BTS3160D is a latching one channel low-side power switch in PG-TO-252-5-13 package providing embedded protective functions. The power transistor is build by a N-channel vertical power MOSFET. The device is controlled by a control chip in Smart Power Technology.The device is able to switch all kind of resistive, inductive and capacitive loads. For lamp loads the lamp-inrush-current, eight- to ten-times the nominal current, has to be considered. The maximal inrush current has to be below the minimum short circuit shutdown current. | Summary of Features: Logic level input compatible to 3.3 V or 5V micro controllers
- Supply by V bb line, down to 6 V
- Very low over all leakage current
- Providing digital fault information
- Electrostatic discharge protection (ESD)
- Экологичный продукт (соответствует требованиям RoHS)
- Thermal shutdown with latch
- AEC Qualified | Target Applications: Body controller (interior light dimming)
- Rear wiper motor driver