Компоненты  »  Датчики  »  Датчики температуры и влажности

Microchip
TCN75-5.0MUA

Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin MSOP Tube

Цена от 112,66 ₽ до 175,33 ₽

Наличие Microchip TCN75-5.0MUA на складах.

Склад
Наличие и цена
Америка 8
В наличии до 800 шт.
MOQ от 1 шт.
Цена от 112,66 ₽ до 175,33 ₽
США
На складе 800 шт.
MOQ 5 шт.
Обновлено 12:35 05.03.2021
Упаковка Tube
155,63 ₽ от 5 шт.
130,08 ₽ от 25 шт.
117,31 ₽ от 100 шт.
113,82 ₽ от 1000 шт.
112,66 ₽ от 5000 шт.
США
На складе 666 шт.
MOQ 1 шт.
Обновлено 19:25 03.03.2021
Упаковка Tube
149,65 ₽ от 1 шт.
149,65 ₽ от 10 шт.
125,08 ₽ от 50 шт.
116,14 ₽ от 100 шт.
116,14 ₽ от 1000 шт.
116,14 ₽ от 10000 шт.
США
На складе 100 шт.
MOQ 100 шт.
Обновлено 12:23 03.03.2021
Упаковка Bulk
150,77 ₽ от 100 шт.
142,95 ₽ от 200 шт.
129,55 ₽ от 300 шт.
122,85 ₽ от 400 шт.
США
На складе 40 шт.
MOQ 1 шт.
Обновлено 14:08 04.03.2021
Упаковка Tube
149,65 ₽ от 1 шт.
127,76 ₽ от 25 шт.
США
На складе 100 шт.
MOQ 100 шт.
Обновлено 09:55 03.03.2021
156,80 ₽ от 100 шт.
148,67 ₽ от 200 шт.
134,73 ₽ от 300 шт.
127,76 ₽ от 400 шт.
США
На складе 100 шт.
MOQ 100 шт.
Обновлено 17:42 04.03.2021
175,33 ₽ от 100 шт.
161,93 ₽ от 200 шт.
США
На складе 95 шт.
Обновлено 16:40 28.02.2021
Цена по запросу.
США
На складе 68 шт.
Обновлено 09:16 05.03.2021
Цена по запросу.

Технические характеристики Microchip TCN75-5.0MUA, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Lead-Free Status:
Lead Free
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Количество бит:
9
Рабочая Температура:
125 °C (max)
Упаковка:
Tube
Количество выводов:
8
RoHS:
Compliant
Supply Current:
250 µA
Supply Voltage (DC):
5.50 V (max), 2.70 V (min)
  • Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin MSOP Tube
  • 2-Wire Serial Temp Sensor/Thermal Monitor8 MSOP 3x3mm TUBE
  • 2-Wire Serial Temp Sensor/Thermal Monitor
  • The TCN75 is a serially programmable temperature sensor that notifies the host controller when ambient temperature exceeds a user programmed set point. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the TCN75 is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis, and configuring the device. The TCN75 powers up in Comparator mode with adefault set point of 80oC with 5oC hysteresis. Defaults allow independent operation as a stand-alone thermostat. A shutdown command may be sent via the 2-wire bus to activate the low-power Standby mode. Address selection inputs allow up to eight TCN75s to share the same 2-wire bus for multi zone monitoring. All registers can be read by the host and the INT/CMPTR output's polarity is user programmable. Both polled and interrupt driven systems are easily accommodated. Small physical size, low installed cost, and ease-of-use make the TCN75 an ideal choice for implementing sophisticated system management schemes.

Документы по Microchip TCN75-5.0MUA, инструкции, описания, datasheet.