Компоненты  »  Датчики  »  Датчики температуры и влажности

Microchip
TCN75-5.0MUA713

Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin MSOP T/R

Цена от 112,66 ₽ до 130,08 ₽

Наличие Microchip TCN75-5.0MUA713 на складах.

Дистрибьютор
Наличие и цена
Microchip
На складе 12500 шт.
MOQ 50 шт.
Обновлено 12:35 05.03.2021
Упаковка Tape & Reel
130,08 ₽ от 50 шт.
117,31 ₽ от 100 шт.
113,82 ₽ от 1000 шт.
112,66 ₽ от 5000 шт.
NetroFlash
На складе 2330 шт.
Обновлено 16:53 04.03.2021
Цена по запросу.
Kenton Components
На складе 10 шт.
Обновлено 01:05 01.03.2021
Цена по запросу.

Технические характеристики Microchip TCN75-5.0MUA713, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Lead-Free Status:
Lead Free
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Количество бит:
9
Рабочая Температура:
125 °C (max)
Упаковка:
Tape, Tape & Reel (TR)
Количество выводов:
8
RoHS:
Compliant
Supply Current:
1.00 mA (max)
Supply Voltage (DC):
5.50 V (max), 2.70 V (min)
  • Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin MSOP T/R
  • Ic,temperature Sensor,tssop,8Pin,plastic Rohs Compliant: Yes
  • 2-Wire Serial Temp Sensor/Thermal Monitor
  • The TCN75 is a serially programmable temperature sensor that notifies the host controller when ambient temperature exceeds a user programmed set point. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the TCN75 is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis, and configuring the device. The TCN75 powers up in Comparator mode with adefault set point of 80oC with 5oC hysteresis. Defaults allow independent operation as a stand-alone thermostat. A shutdown command may be sent via the 2-wire bus to activate the low-power Standby mode. Address selection inputs allow up to eight TCN75s to share the same 2-wire bus for multi zone monitoring. All registers can be read by the host and the INT/CMPTR output's polarity is user programmable. Both polled and interrupt driven systems are easily accommodated. Small physical size, low installed cost, and ease-of-use make the TCN75 an ideal choice for implementing sophisticated system management schemes.

Документы по Microchip TCN75-5.0MUA713, инструкции, описания, datasheet.

Товары похожие на Microchip TCN75-5.0MUA713, сравнение характеристик.