Компоненты  »  Интегральные схемы (ИС)  »  Линейные ИС  »  Усилители - Аудио

Texas Instruments
TAS5086DBT

Audio Control, Digital Audio Interface, 3V To 3.6V, I2c, Serial, Tssop, 38, 0 C Rohs Compliant: Yes

Цена от 299,67 ₽ до 1 365,64 ₽

Наличие Texas Instruments TAS5086DBT на складах.

Склад
Наличие и цена
Америка 5
В наличии до 29127 шт.
MOQ от 1 шт.
Цена от 299,67 ₽ до 686,70 ₽
США
На складе 3150 шт.
MOQ 1 шт.
Обновлено 02:06 28.02.2021
Упаковка Tube
605,29 ₽ от 1 шт.
530,37 ₽ от 100 шт.
371,90 ₽ от 250 шт.
299,67 ₽ от 1000 шт.
США
На складе 190 шт.
MOQ 1 шт.
Обновлено 19:56 26.02.2021
Упаковка Tube
686,70 ₽ от 1 шт.
620,50 ₽ от 10 шт.
591,32 ₽ от 50 шт.
490,34 ₽ от 100 шт.
374,77 ₽ от 1000 шт.
374,77 ₽ от 10000 шт.
США
На складе 29127 шт.
Обновлено 09:56 27.02.2021
448,21 ₽ от 1 шт.
439,25 ₽ от 25 шт.
430,27 ₽ от 100 шт.
421,31 ₽ от 500 шт.
412,35 ₽ от 1000 шт.
США
На складе 15 шт.
Обновлено 22:06 21.02.2021
Цена по запросу.
США
На складе 650 шт.
Обновлено 15:43 22.02.2021
Цена по запросу.
Европа 1
В наличии до 350 шт.
MOQ от 100 шт.
Британия
На складе 350 шт.
Обновлено 21:49 15.02.2021
Цена по запросу.
Азия 1
В наличии до 6 шт.
MOQ от 1 шт.
Цена от 1 060,95 ₽ до 1 365,64 ₽
Китай
На складе 6 шт.
MOQ 1 шт.
Обновлено 23:39 27.02.2021
1 365,64 ₽ от 1 шт.
1 169,09 ₽ от 10 шт.
1 132,96 ₽ от 30 шт.
1 096,84 ₽ от 100 шт.
1 080,89 ₽ от 500 шт.
1 060,95 ₽ от 1000 шт.

Технические характеристики Texas Instruments TAS5086DBT, атрибуты и параметры.

Тип корпуса / Кейс:
TSSOP
Lead-Free Status:
Lead Free
Статус жизненного цикла:
Active
Mounting Style:
Surface Mount
Рабочая Температура:
0.00 °C to 70.0 °C
Выходная мощность:
817 mW
Упаковка:
Cut Tape (CT)
Количество выводов:
38
REACH SVHC Compliance:
No SVHC
RoHS:
Compliant
  • Audio Control, Digital Audio Interface, 3V To 3.6V, I2c, Serial, Tssop, 38, 0 C Rohs Compliant: Yes
  • Six Channel Digital Audio PWM Processor 38-Pin TSSOP Tube
  • The TAS5086 is a six-channel digital pulse-width modulator (PWM) that provides both advanced performance and a high level of system integration. The TAS5086 is designed to interface seamlessly with most audio digital signal processors and MPEG decoders, accepting a wide range of input data and clock formats.The TAS5086 drives six channels of speakers in either single-ended or bridge-tied load configurations that accept a 1N + 1 interface format. The TAS5086 also supports 2N + 1 power stages with the use of some external logic (e.g., TAS5112). Stereo line out in I2S format is available with either a pass-through signal (SDIN4) or an internal downmix.The TAS5086 uses AD modulation operating at a 384-kHz switching rate for 32-, 44.1-, 48-, 88.2-, 96-, 176.4-, and 192-kHz data. The 8 oversampling, combined with the 4th-order noise shaper, provides a broad, flat noise floor and excellent dynamic range from 20 Hz to 20 kHz. The TAS5086 is only an I2C slave device, which always receives MCLK, SCLK, and LRCLK from other system components. The TAS5086 accepts clock rates of 128, 192, 256, 384, and 512 fS. The TAS5086 accepts a 64-fS master clock for 176.4-kHz and 192-kHz data. The TAS5086 accepts a 64-fS bit clock for all data rates. The TAS5086 also can accept a 48-fS SCLK rate for MCLK ratios of 192 fS and 384 fS. The TAS5086 is composed of five functional blocks. Power supplyClock, PLL, and serial data interface Serial control interfaceDevice controlPWM section For detailed application information, see the Using the PurePath Digital PWM Processor application report (SLEA046).

Документы по Texas Instruments TAS5086DBT, инструкции, описания, datasheet.

Товары похожие на Texas Instruments TAS5086DBT, сравнение характеристик.