Компоненты  »  Интегральные схемы (ИС)  »  ИС преобразователя данных  »  Цифровые потенциометры

Analog Devices
AD5162BRM2.5

Digital Potentiometer 256POS 2.5kOhm Dual 10-Pin MSOP Tube

Цена от 167,96 ₽ до 182,57 ₽

Наличие Analog Devices AD5162BRM2.5 на складах.

Дистрибьютор
Наличие и цена
Rochester Electronics
На складе 13338 шт.
Обновлено 09:56 27.02.2021
182,57 ₽ от 1 шт.
178,92 ₽ от 25 шт.
175,26 ₽ от 100 шт.
171,61 ₽ от 500 шт.
167,96 ₽ от 1000 шт.
Ampacity Systems
На складе 851 шт.
Обновлено 17:16 27.02.2021
Цена по запросу.

Технические характеристики Analog Devices AD5162BRM2.5, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Clock Speed:
25.0 MHz (max)
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Pending Obsolescence
Mounting Style:
Surface Mount
Количество контуров:
2
Рабочая Температура:
125 °C (max)
Упаковка:
Tube
Количество выводов:
10
Ток покоя:
3.50 µA
Сопротивление:
2.50 kΩ
Resistance Tolerance:
±20%
RoHS:
Non-Compliant
Supply Current:
3.50 µA
Supply Voltage (DC):
5.50 V (max), 2.70 V (min)
Температурный коэффициент:
35.0 ppm/°C
  • Digital Potentiometer 256POS 2.5kOhm Dual 10-Pin MSOP Tube
  • IC, DIG POT, 2.5KOHM, MSOP-10
  • End To End Resistance:2.5kohm
  • Допуск сопротивления: ± 20%
  • Диапазон напряжения питания: от 2,7 В до 5,5 В
  • Potentiometer IC Case Style:MSOP
  • Количество контактов: 10
  • Количество ступеней: 256
  • Интерфейс управления: SPI
  • The AD5162 provides a compact 3 mm x 4.9 mm packaged solution for dual 256 position adjustment applications. This device performs the same electronic adjustment function as a 3-terminal mechanical potentiometer. Available in four different end-to-end resistance values (2.5 kO, 10 kO, 50 kO, 100 kO), this low temperature coefficient device is ideal for high accuracy and stability-variable resistance adjustments. The wiper settings are controllable through the SPI compatible digital interface. The resistance between the wiper and either end point of the fixed resistor varies linearly with respect to the digital code transferred into the RDAC latch1. Operating from a 2.7 V to 5.5 V power supply and consuming less than 6 µA allows the AD5162 to be used in portable battery-operated applications. For applications that program the AD5162 at the factory, Analog Devices offers device programming software running on Windows® NT/2000/XP operating systems. This software effectively replaces the need for external SPI controllers, which in turn enhances the time to market of systems. An AD5162 evaluation kit and software are available. The kit includes a cable and instruction manual. 1 The terms digital potentiometer, VT, and RDAC are used interchangeably. Applications Systems calibrations Electronics level settings Mechanical trimmers replacement in new designs Permanent factory PCB setting Transducer adjustment of pressure, temperature, position, chemical, and optical sensors RF amplifier biasing Automotive electronics adjustment Gain control and offset adjustment

Документы по Analog Devices AD5162BRM2.5, инструкции, описания, datasheet.

Товары похожие на Analog Devices AD5162BRM2.5, сравнение характеристик.