Компоненты  »  Интегральные схемы (ИС)  »  ИС преобразователя данных  »  Цифровые потенциометры

Analog Devices
AD5172BRM2.5

Digital Potentiometer 2.5kOhm 256POS Volatile 10-Pin MSOP Tube

Цена от 217,18 ₽ до 264,07 ₽

Наличие Analog Devices AD5172BRM2.5 на складах.

Дистрибьютор
Наличие и цена
Rochester Electronics
На складе 4782 шт.
Обновлено 09:56 26.02.2021
236,07 ₽ от 1 шт.
231,34 ₽ от 25 шт.
226,63 ₽ от 100 шт.
221,90 ₽ от 500 шт.
217,18 ₽ от 1000 шт.
Verical
На складе 31 шт.
MOQ 4 шт.
Обновлено 17:47 25.02.2021
228,72 ₽ от 4 шт.
Arrow Electronics
На складе 31 шт.
MOQ 1 шт.
Обновлено 16:10 25.02.2021
237,87 ₽ от 1 шт.
Arrow.cn
На складе 31 шт.
MOQ 1 шт.
Обновлено 15:46 25.02.2021
264,07 ₽ от 1 шт.
Suntronic
На складе 4787 шт.
Обновлено 08:25 26.02.2021
Упаковка Tube
Цена по запросу.

Технические характеристики Analog Devices AD5172BRM2.5, атрибуты и параметры.

Тип корпуса / Кейс:
MSOP
Clock Speed:
400 kHz (max)
Lead-Free Status:
Contains Lead
Статус жизненного цикла:
Pending Obsolescence
Mounting Style:
Surface Mount
Количество контуров:
2
Рабочая Температура:
125 °C (max)
Упаковка:
Tube
Количество выводов:
10
Ток покоя:
3.50 µA
Сопротивление:
2.50 kΩ
RoHS:
Non-Compliant
Supply Current:
3.50 µA
Температурный коэффициент:
35.0 ppm/°C
  • Digital Potentiometer 2.5kOhm 256POS Volatile 10-Pin MSOP Tube
  • IC POT DUAL 2.5K 256POS 10-MSOP
  • 256-POSITION, DUAL I2C DIGI-POT
  • Dual OTP 8Bit I2C DigiPOT., TUBE
  • The AD5172/AD5173 are dual-channel, 256-position, one-time programmable (OTP) digital potentiometers1 that employ fuse link technology to achieve memory retention of resistance settings. OTP is a cost-effective alternative to EEMEM for users who do not need to program the digital potentiometer setting in memory more than once. These devices perform the same electronic adjustment function as mechanical potentiometers or variable resistors with enhanced resolution, solid-state reliabil-ity, and superior low temperature coefficient performance. The AD5172/AD5173 are programmed using a 2-wire, I2C®-compatible digital interface. Unlimited adjustments are allowed before permanently setting the resistance value. During OTP activation, a permanent blow fuse command freezes the wiper position (analogous to placing epoxy on a mechanical trimmer). Unlike traditional OTP digital potentiometers, the AD5172/ AD5173 have a unique temporary OTP overwrite feature that allows for new adjustments even after a fuse is blown. However, the OTP setting is restored during subsequent power-up condi-tions. This allows users to treat these digital potentiometers as volatile potentiometers with a programmable preset. Applications Systems calibration Electronics level setting Mechanical trimmers replacement in new designs Permanent factory PCB setting Transducer adjustment of pressure, temperature, position, chemical, and optical sensors RF amplifier biasing Automotive electronics adjustment Gain control and offset adjustment 1 The terms digital potentiometer, VR, and RDAC are used interchangeably.

Документы по Analog Devices AD5172BRM2.5, инструкции, описания, datasheet.

Товары похожие на Analog Devices AD5172BRM2.5, сравнение характеристик.